Recent content by snydmax

Jaysen4runner are these still a thing? Sent from my iPhone using Tapatalk

OME with stock weight is a bouncer! Like others have said, they’re designed for more weight Sent from my iPhone using Tapatalk

TEQ’s “OEM+” Sent from my iPhone using Tapatalk

Can throw a spacer over the rear drivers spring and/or drivers front strut to offset the lean I think this is what came with my OME kit for the rear, goes between the coilsnsprong and jounce cone. Old Man Emu Trim Packer 10MM (OME80PF10) Or this up front… just one on drivers side, not sire...

I threw these on to buy some time while I decided what lift i wanted… 5 years later, I just swapped em for an OME setup a couple weeks ago, not because the needed it, bit I was tearing into the suspension and was ready to lift. Looks like the rear shocks are unavailable on Amazon currently...

Curious what you find. I just bled mine a couple weeks ago and had the same thing, very clear but very green fluid. It was all flushed out probably 1.5 years ago when replacing the master cylinder and calipers. Like you mentioned, it was not dark or cloudy at all, just green. Have not...

I originally did this to prevent the Moog springs I was installing from sagging, work great to get rid of the bounce and sag when loading up… just swapped em into the new OME’s, mostly because you have to cut down the jounce bumper and the plumbing was already done. Sent from my iPhone using...

Nice grille! Sent from my iPhone using Tapatalk

‘05 3rd gen? Sent from my iPhone using Tapatalk

Valve cover gaskets w/ new plugs, wires and coils… every gasket I encounter was aftermarket, the intake plenum w appear to be sealed very well and the spark plug tube seals stayed on the tubes. Not sure the last guy knew what he was doing. All better now! Idling nice and smooth. Hat tip mtbtim...

Tacoma (trd?) take-offs: 16” Falken Wildpeak AT3w 265/75-16’s OME 883/990 Fits TBU (pic show previous sin-sin amazon coil/strut assys) Note: rims came wrapped with some 285/70 m/t’s that rubbed the knuckle up top Sent from my iPhone using Tapatalk

I just replaced mine (again) after about 50k because they were super loose when I disconnected them to do some suspension work. Dont know if they actually needed it but I have a disorder that kicks in every time I remove parts [emoji1787] Similar story, replaced the originals preventatively...

Had same… eventually replaced everything up front… some play remained. Tack welded the slip thingy and play gone, never looked back Sent from my iPhone using Tapatalk

Like mine, like mtbtim said… to early to comment on longevity Grabbed their trd pro style grill too during black Friday deal Sent from my iPhone using Tapatalk

Removed the knuckles, ucas and lcas… got em dropped off with my mechanic buddy to press new bearings and bushings Sent from my iPhone using Tapatalk