Recent content by ThatguyJZ

Big thanks for this thread. I would like to add it is possible to do the axle seals WITHOUT removing the rear parking brake shoes and hardware. Yes, that's right. The most tedious part of this whole process is not actually necessary. Unbolt the brackets securing the parking brake cable to...

I think that'll work in theory but I still think you'll get some lift out of it since I do believe the perches on the 3rd gen Tacoma shocks sit higher. Yes, Bilstein 4600 Update on my setup ('14 Tacoma TRD Off Road springs/struts and front coils) , it's been almost 10k miles including a few...

Nice build! I'll be tackling axles myself real soon. Any advice? Did you remove the tie rod from the spindle or just the two 19mm's by the LBJ?

I found McGeorge Toyota had it a little cheaper https://parts.mcgeorgetoyota.com Just did mine this weekend. Super easy, just lower back window and pull up and out from one end to the other. Also blew out all the crud and dirt from the seal

Where in VA? I'll be at VIR this weekend which is in Alton

I'd recommend Load C, they are much lighter and do the job just fine. There is no difference in size between the two. I did however feel a BIG difference going from Load E BFG KO2's down to Load C Duratrac's on my Tacoma. If you do not have air tools, impacts, spring compressors, and want to...

Looks awesome! Exactly what I'm going for on my wife's 4runner, except with 5th gen T4R 7 spoke Trail wheels. Those FJ wheels look killer on your Black Limited!

Not sure if it's been mentioned but 3rd gen Tacoma (2016+) coils and front shocks are different from 2nd gen Tacoma. They install the same but the springs are taller as well as the shock perches. 2nd gen trucks that install 3rd gen stock suspension gain about 1 inch of front lift. Therefore...