Recent content by Tim McBride

  1. Tim McBride

    Check those front balljoints..........

    MOOG and NAPA are not owned by the same company as far as I know. MOOG is owned by Federal-Mogul Napa is owned by Genuine Parts Company I installed the MOOGs because I already had them, and bought them before I read about the issues that some have had with them. I had bought them so long ago...
  2. Tim McBride

    Its drinking coolant.

    You keep mentioning the overflow. Are you sure it doesn't have a minor leak? IE; with the overflow empty are you actually low on coolant in the rad?
  3. Tim McBride

    Check those front balljoints..........

    All done except for an alignment after Christmas. A note; If you plan on replacing the Lower Control arm bushing you will have to move the rack& pinion out of the way to remove the sleeves and bolts on the control arm itself.
  4. Tim McBride

    Did I just make a huge mistake? Front end has NO give after lift

    Did you remember to loosen the control arm bolts (upper and Lower) and then re tighten them only after it was sitting on the ground? This helps also. Should be done when ever you install a lift or change anything on the front suspension.
  5. Tim McBride

    Check those front balljoints..........

    No but maybe the other side when I do it
  6. Tim McBride

    Had to tow it to the shop...

    The boot end of the plug was stuck on the plug? Long pair of needle nose pliers...
  7. Tim McBride

    Check those front balljoints..........

    Got those old bushings out. Fire
  8. Tim McBride

    purchasing Sat... thoughts?

    Has it had any timing work at all or just not one since 100k? At 200k, even if it had one done at 100k; it is time for another. Use teh water pump/timing belt as leverage, you;ll be spending some cash on that. Also check the lower ball joints if you can. If it is the original to the vehicle...
  9. Tim McBride

    Common Problems

    Go here: http://www.toyota-4runner.org/3rd-gen-t4rs/82033-3rd-gen-4runner-buyers-guide.html A thread with all the things a used buyer should look at.
  10. Tim McBride

    Check those front balljoints..........

    Guess I'll have to try that
  11. Tim McBride

    Check those front balljoints..........

    I cannot get the Upper Control arm bushings out of the UCA.... Any suggestions?
  12. Tim McBride

    Check those front balljoints..........

    Got the timing belt job finished. Also did the water pump, seals, thermostat, hoses, radiator, and belts. Glad I did the pump, it was leaking, the last time it was done was the last timing job at 89k, looks like the previous tech had just used RTV to seal it up. I also got the entire right...
  13. Tim McBride

    What Did You Do To Your 3rd Gen Today?

    Finished installing the new timing belt, water bump, radiator, new belts and hoses. Removed the entire right front suspension. Should have that side rebuilt tomorrow and then onto the left side.
  14. Tim McBride

    3.4L, upper idler retaining bolt broke, where to get one?

    I'll have to ask, I just sent my friend a text with a pic, and he went and got me the right bolt.
  15. Tim McBride

    3.4L, upper idler retaining bolt broke, where to get one?

    The bolt is available from toyota still. Picked one up from my friend today.

Members online

Forum statistics

Threads
278,307
Messages
3,554,048
Members
248,016
Latest member
Advally Service
Back
Top