Recent content by TOY4R3

Okay well the problem was me!! I pinched the crank position sensor wire. Runs great!! burping the system now. Thanks for the help everyone.

I ordered the crank sensor from Toyota should be here Wednesday. When I get back to work Tuesday. I will check the wiring to see if Something went screwy. Also I forgot to mention I did check for spark but there is none. I will let the curious know what I find.

Do you mean the camshaft Plug? If looking down at the engine from the front of the 4Runner. I made sure that the plug was routed in between the belt and through the timing belt cover hole. I never removed the crankshaft sensor until after everything was together and That was from under the...

I know the connection was good when I removed and cleaned it and the Connector.I reinstalled it and the connector snapped in with that audible click.So I know it has a good connection. There is no visible damage.I am 100% sure I did not damage it. So I guess I should order a new one and see. I...

Just replaced the timing belt on my 2003 Toyota 4Runner V8. Engine cranks beautiful but no start. I ran a scanner on it and it said the Crank sensor circuit A with code PO335 and with the cheap 125 buck scanner I was able to do an RPM check with it and it showed 0 when cranking. The thing that...

I just purchased a 2003 4Runner V8.Beautiful condition from Virginia. 4runner came up here to Michigan a few years ago.Anyways The dash was cracked and through this forum I found out about the replacement program.Now I am on the list for a new dash replacement. I expect a call within the next...