Recent content by TOYOTABOONE

Toyota's saying eta is November of 2006

Re: Which Dealer? Mark Miller

Yes, I work in a parts department in SLC

Genuine Toyota Hood Protector Hey everyone, Toyota part # for an 06 is PT427-89060 Looks like it is expected in November of 06, but the way accessories have been going lately, I wouldn't be surprised if they pushed it back again. I have 8 on backorder right now. If it doesn't say Toyota on...

The location of that switch is where the antenna switch usually goes on 1st gen's that had power antenna's.

ECT stands for Electronically Controlled Transmission, so it basically changes the shift points for hills & towing, but if you have the pedal mashed to the floor anyway, it's not going to affect anything. When you're pulling a load up hills is when you'll notice it because you won't have to push...

This would be interesting to try. I've never heard of this before.

Toyota part# is 85192-12800 I keep them in stock. Check with your local dealer, chances are so do they.

Here, try this link http://forums.delphiforums.com/tacomaterritory/messages?msg=105973.25

Here, try this link http://forums.delphiforums.com/tacomaterritory/messages?msg=105973.25

Okay, I know the back of the radio is the same but the face is wider so you do have to make the hole in your dash wider, but the wiring I thought was the same, let me double check this & I'll get back to you.

What head unit did you buy, & what year is your 4runner?

This sticker is there to let you know not to use single electrode spark plugs. The system is set up so it fires twice, so you need to use dual electrode plugs. Everyone I know who puts Bosch plugs in hates them, so I would recommend the factory denso or NGK's work good too. I don't think I've...

Okay, the plugs are the same so it should bolt right in. As far as trimming, the stereos are the same size so it bolt right in, but the face on the Scion HU is wider. I'll take some pics this weekend of the trimming that is needed.

I put a Scion head unit in my 87. It works great, however there are a couple issues. The Scion head unit is wider, so you will need to make the hole in your dash wider. In my 87 I had to change the connector on my wire harness, but I think the one in your 97 will work(I can check this tonight...