Recent content by traildog

peter78 I have a V6 ‘08 and recently replaced the bumper hitch with the weight distributing hitch. These are the parts you’ll need. PT228-89460 Tow hitch 08925-35870 Receiver Assembly I picked up both from here: Toyota Parts Factory - #1 Source for Genuine OEM Toyota Scion Parts & Accessories...

There's also URD .... URD Mk3 Supercharger Kit for 2005-2009 4Runner, Stage I - Underdog Racing Development URD Mk3 Supercharger Kit for 2005-2009 Toyota 4Runner V8 - Underdog Racing Development

You could always add one of these to increase power .... v6: URD Mk3 Supercharger Kit for 2005-2009 4Runner, Stage I - Underdog Racing Development v8: URD Mk3 Supercharger Kit for 2005-2009 Toyota 4Runner V8 - Underdog Racing Development

shmabs I started with the Shrockworks dual battery kit. Dual Battery Kit for 2010-2014 FJ Cruiser and 5th Generation 4Runner I liked that it had the bracket for the power steering reservoir built in. Even though it was designed for an Optima battery, I figured I could cut the end off and let...

If space maximization is your biggest concerning then the front right corner can fit a Group 34 with relocation of the power steering reservoir. <blockquote class="instagram-media" data-instgrm-captioned data-instgrm-permalink="https://www.instagram.com/p/B0U0KNmnUTG/" data-instgrm-version="12"...

MattOB1890 see this thread for speedo ... DIY: Interior LED swap (cluster, HVAC, switches, window, *steering wheel) - Toyota 4Runner Forum - Largest 4Runner Forum

FYI, make sure you test the clamps on the boots before install. You should not be able to move them by hand. If it does move, grease will blow out the boot and you'll have a nice mess to deal with.

You obviously presumed, incorrectly, that I had gone over this thread in detail. At the time of reading/skimming I was on a brief break of a full day of training at work. Since I had limited time, have an interest in better braking given the additional weight added to my rig, and not fully aware...

I would check all your grounds. Make sure they're tight. Giving them a good clean wouldn't hurt either to ensure good metal to metal contact.

Is this system larger than what is on the sport editions?

My Coastal Off-road aluminum front bumper arrives Friday and I need to find a fabricator to weld it together in the Phoenix metro area. 4th Gen 4Runner High Clearance Front Bumper Kit | website I've reached out to Hunter Offroad, Home, and his welder is not powerful enough to handle the...

Here's the layout of the C9 & C10 connectors for those who will be adding this in the future. I would double check you are using the correct pin and not base it just on wire color. I thought I had hooked up to the "brown" wire only to find out later that it was brown with a red stripe. Red...

JONBOY345 I'm curious as to what was the behavior when you had it installed incorrectly? Was your speedometer sporadic or just dead?

I'd reach out to Crutchfield (Crutchfield: Car Stereo, Speakers, Home Theater, Pro Audio, 4k TV). Their customer service is top notch and they should be able to help you figure out what you need.