Thats a very good write up I'll give you a tip when you do this just do a 1 foot by 1 foot or 2 foot by 2 foot square at a time any bigger and you are just wasting your time you will get it. good luck by the way realy the truck looks good I dont see any rust good luck and have fun
Sorry I hope I didnt afend you.Just telling you what you would be looking at if you go eather way if you go with a good buff job and keep good wax on it ( something with carnauba wax in it) will shine longer. Most detail shops s charge any where from 100 to 350 for a buff job or you can get a...
let me help you guys out I have done body work for over 20 years and what I see is a single stage paint you can buff it out but in about 3 mounths it will fade back out single stage has no clear if you want it fixed you need to take it to a body shop and have it done right for about $3500 to...
I think if this is the problem you would notice the vibration at low speeds and giving it alot of gas to put torque on the rear end as well.If this was it why would it only do it at the heigher speeds?Almost sounds like a tire that is out of balance.
Like fourwd1 I would look at the e-brake push it in when your light comes on if it goes out bingo you found it.You might have to adjust the switch under the dash.
Im a member on another toyota site and couldnt post any theards.I sent emails for hlep but never did get any, so I started looking for a better one and this one is it.I love this site THANKS Ill be here for a long time.
Well good news and bad news.Good news got it to crank and start yepie :zoom: .I just got thinking about the way all the relays and starter was making noise thought it was ground right... nope my battery charger was only putting out 10.6V aahaa not ground but low voltage.ERRRRRR. Now the...
I like it,when I show this to my 2 sons they will want me to do this to their trucks.Or I just might do it without them knowing and see how long it takes them to notice lol.
I bet Toyota has the carpet and head lights made by some other company not in house so some of what you are see could be that they just picked a bad suplier.I bet it runs and drives great and that it will for many years.
yep tried that to funny thing is when I push and hold the clutch button the buzzing sound changes a bit,and the clutch button light will not stay on like it should.I will make a video so you can hear what Im talking about.
Bad_Vision is right when I was doing body and frame work I used a metric tapemeasure.I would X measure and straight measure to get it square.You can do it.:thumb3:
You would see one like that sell for 2500 to 3k in Missouri its hard to find a clean one here.I have bought 3 of them this year one for $500 not running rusted carpet shot. 600 for the other 2 each one is parts truck only no title the other was rusted bad and has a knock in the motor.Just to...