So put up some wrong info. Sorry was going off a photo instead of double checking.
I am running an LT255/80R17 (33.06") Wildpeak AT3
I am really happy with them. Often I am driving to work in 4-12 inches of snow before the plow guy gets to the roads or on back roads that don't get plowed...
I am running 255/70 r17s with a 3 inch lift. Wildpeak at3
Have just a little bit of rubbing from the front when turning. I just need to massage some of the inner fender lining with a heat gun or cut off wheel
EDIT : 255/80 R17s
Seems excessive. Probably the "I don't really want to do this job but I don't want to say no price."
My local Lexus dealer just gave me a price quote of $1524 for the wife's GX470 which has the same engine. Timing belt and Waterpump replacement.
Radio Upgrade
Just completed the Scion Radio update. Happy with it. Though I am leaning towards getting the Toyota version just because. Waiting on the USB and Camera adapter. USB adapter is about 4+ weeks out.
I just did the Draw-Tite install replaced my factory cross member mounted hitch with the frame mounted hitch. I Didnt have to trim the Fascia but I did take off the rear bumper fascia. It helped getting that stuff out of the way while doing the uninstall/install. Plus I was sanding/wire...
Finally finished up installing the Dobinson's lift from Exit Offroad on my 04 V6 4runner. Only snapped on bolt on the Rear Swaybar End link so those ended up getting replaced also. Got close to 2.5"-3" lift and it maintained the rake. Got the HD Springs since I will be loaded up with a RTT and...
Not the most exciting because I am stuck at work all weekend.
Swapped the guts/LCD display of a working (but rough looking) Multi Information Display Unit (AC Control thing) into my non working (but fairly pristine) Unit.
Easy swap and everything works. Able to do it in the Air conditioning...
Is the interior tan? If so do you still have the caps that cover the bolts holding the passenger seat to the floor and the rear passenger seat belt bolt?
Sent from my Pixel 2 XL using Tapatalk
Installed a smoker's kit with a USB QC option and battery charge readout. Swapped out the multi information display/HVAC control system for a working eBay system.
Is it feasible to swap the guts of one Multi information display/HVAC control board for another? Mine is in much better condition...