Recent content by wsteele8974

  1. W

    The 3rd Gen All Questions Allowed Thread

    How's it going guys! Finally redid my lift and I'm really happy with the results! 2000 4runner 2WD w/3RZ 2.7l Bilstein 5100's front and back, OME 880 front, 906 rear, 3rd gen front sway bar links in the back and 2nd gen rear sway bar links in the front.
  2. W

    The 3rd Gen All Questions Allowed Thread

    Same with the Toyota dealerships here on the big Island. When they quoted 600 for the lowers, I about had a heart attack!
  3. W

    The 3rd Gen All Questions Allowed Thread

    I'll give that a try, see if it helps. The prices for the LBJ's and castle nuts were good until I saw how much they wanted for shipping. Then again I live in Hawaii so shipping cost shouldn't have been a surprise for me.....
  4. W

    The 3rd Gen All Questions Allowed Thread

    Hey guys, back again. Had to do some front brake work on my 3rd gen, rotors, calipers and pads. My rears seemed loose so I manually adjusted them and noticed that my ebrake lever was pretty hard to pull after 5 clicks and when I checked the temp of the rears with my infrared after a 30 mile...
  5. W

    The 3rd Gen All Questions Allowed Thread

    I want to thank you guys for your help. I do however, have one more question. I got the alignment done about 4 months ago along with new 245/70/16's. I forgot to mention that it has 2in. revtek spring spacers in the front and I believe the revtek 2in. shocks and springs in the rear(both were...
  6. W

    The 3rd Gen All Questions Allowed Thread

    It sounds like either your A/C pump is seized(never personally seen one do that)or the A/C clutch is hung up.
  7. W

    The 3rd Gen All Questions Allowed Thread

    I'll definitely check the driveshaft and put in my order for the 2nd gen links. Is there a particular brand for the ball joints you would recommend?
  8. W

    The 3rd Gen All Questions Allowed Thread

    Hey guys, newbie here. I got a 2000 2wd 4runner, and wanted to know if I have to upgrade my upper and lower ball joints along with the front/rear sway bar links to accommodate the ome 880/906 springs w/Bilstein 5100's lift or if can those stay stock?
  9. W

    Found these on Amazon: Any Good?

    Had them on mine, and they didn't last long.
  10. W

    Are OME 880s side specific?

    If I remember correctly, the left is about 3/16" taller than the right on the 880's.
  11. W

    What Did You Do To Your 3rd Gen Today?

    Had to put a water pump in mine. Thank the lord it was external.....
  12. W

    Review of OME 880/906 Lift for 3rd Gen 4Runner

    I'm looking at the 880/906 bilstein 5100 package for my 2000 2wd. Your review helped in my decision making.

Members online

Forum statistics

Threads
278,309
Messages
3,554,070
Members
248,016
Latest member
Advally Service
Back
Top