Recent content by wyorunner

I don't know to be exact. But I'd say close to 1000lbs. The 4runner pulls it with ease.

I have an M416 1/4 ton military trailer, that has been slightly modified by adding a lid and trailertop tent. The Globetrotter tent is made by Eezi-Awn and is a tough canvas style material. it is designerd specifically for a trailer. To see more about the tent please visit, AT-Roof Top...

I know these are not 4runners, but if any one would like to see our newest toyota additions check it it out. Project 3 to 1, The Purple Plum T.

The blinkers, Rear bumper has been put on pause for a little while. Ill get a picture of where I've left it soon.

pm sent

Its kind of hard to tell but this picture shows my side hoops inside the bumper. I made the hoops long enough and brought it through the bumper for added strength. It was then welded to the lowest piece of bumper.

John, I meant to put this up yesterday. Here is one side of the mounting bolts. Thanks for the props. I would actually like to work as a fabricator. Turner

Bandit, you rock the CAD, keep up the good work. Im more than satisfied with it. Except for some reason I couldn't manage to do it on the cheap. Thats ok. Thanks again.

I'd be in for a get together. I live in kennesaw/marietta just off canton hwy.

NO WAY IN HELL!!!! I can still pick this one up with ease when the winch is not in it. With the winch in its heavy but I can still move it. The old one, could barely move with or with out the winch. The old one was built around a solid 1/2" piece, with a 3x8 box steel for the winch plate...

To be honest revenant, I never really had a hole lot of clearance issues. The only thing that ever hit on the last one was the steel cap on the end of the tire carrier piece that went into the receiver. Im actually going to try and do a swing out instead of a swing over. It is much easier to...

BUY IT!!! Especially if it only has 59K on it. These trucks last for a long time, friend of mine is driving a 98 with 260 and change. Also, I paid 14 for my 02 when it had 63k in 2007.

95% Finished Product I will get some more pictures today. Some of the mounting bolts, and other bits that are not visible from the above pictures. I also put blinkers in it yesterday. I still have to weld on the side braces and fog light pipe and bracket. Also, it would not be kind of...

Now to fill it out! Bumper tacked together Winch that went in after being put back together(it was broken) All Welded Up My Welds

Big John, I definitely should have posted the thickness, the entire mount is 1/4" and then the rest is 3/16, with 1/8" 1.75 tube. And its strong as hell, much strong than my older ones. As far as grinding and flapping goes, I put on a type of paint that filled all the gouge marks. I...