Recent content by ycl1688

Here is the part # you need to get the new pan, if needed. The Transmission Pan (35106-35110) around $87.75 online. Toyota recommends using Sealant (00295-00103) which is $10.37, instead of a Gasket.

spark plugs change and pcv valve change.

Make sure you have the fresh battery, Try this 1. Start with the following conditions: you are in the vehicle a. Key is out of the ignition b. Drive door is open ( all other doors are closed) c. Driver door is unlocked (other door locks don't matter) 2. Insert the key into the ignition (don't...

what is the difference between lucas 10043 and 10046 gear oil 80w-90 ? 10046 seems to be higher price wise. This is for 2001 4runners rear differential.

what do you use for the rear lube oil ?

what will you do to get the zerk fitting out of #4 and #5 out ? because the fittings are stuck, grease is oozing out of the fittings and not going in.

any thought filling grease to rear and front shaft with 4 wheel drive ? having problems trying to get the grease fittings out. looks like one or two of the rear shaft front part grease fittings do not take in grease.

what size socket and wrench did you use to get this out ?

the point is out of 9 zerk fittings, 7 are 6mm fitting with 7mm socket to get it out, 2 of the fittings cannot, it happens at the double cardan joint.

I have 2001 4runner, on rear shaft, double cardan joint one of the three zerk fitting, the first one has problem with squeezing grease, with 7mm socket to get the fitting out, other fittings seem to fit with 7mm socket, what is the problem ? I had 6mm zerk fitting on the drive shaft.