User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 12-03-2012, 05:38 PM #16
emelianenkov's Avatar
emelianenkov emelianenkov is offline
Elite Member
 
Join Date: Dec 2010
Location: Andover, MA
Age: 29
Posts: 5,425
Real Name: Alex
emelianenkov is on a distinguished road
emelianenkov emelianenkov is offline
Elite Member
emelianenkov's Avatar
 
Join Date: Dec 2010
Location: Andover, MA
Age: 29
Posts: 5,425
Real Name: Alex
emelianenkov is on a distinguished road
Quote:
Originally Posted by aha2988 View Post
probably is about time for an update...

personally I love it, the sound from it is awesome. Zero emission smells or noticeably even with the charcoal filter removed and a high flow K&N filter. no matter if the engine runs for long trips and sits or just sits for countless nights waiting on parts lol.

as far as the effects of the cabin under increased negative air pressure zero issues. Recently I pulled my rear cargo panels, cargo shelf, and carpet. also had the rear bench seat folded down and I could hear the air flow coming from the rear of the truck back at the vents. I can say there was perhaps more dust and dirt on the underside of the cargo panels than normally would be there but it's a non-issue to me.

only negativity I can conclude is the snorkel's effectiveness is limited to the door seals remaining sealed. If the truck were to flood well there goes your snorkel; however, if water has gotten there you've got way more problems than some water in your engine.
I know all about flooding my truck. The seals don't hold up too well.. :/
__________________
-07 FJ Cruiser 6MT. 185k. Camburg 3.5" Long Travel.
-17 Subaru WRX STI. 305AWHP/311AWTQ. Warranty delete.
-13 Subaru Crosstrek CVT. / 05 Subaru Outback limited 5MT. Flip project.
-99 Ford F-250 Super Duty Lariat 4x4. 7.3 PowerStroke. SCLB.
-93 Toyota Pickup Crawler 5MT Solid axle swap. 37's. / 82 Yota Pickup.
emelianenkov is offline   Reply With QuoteReply With Quote
Old 12-03-2012, 05:48 PM #17
aha2988's Avatar
aha2988 aha2988 is offline
Senior Member
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
aha2988 aha2988 is offline
Senior Member
aha2988's Avatar
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
Quote:
Originally Posted by emelianenkov View Post
I know all about flooding my truck. The seals don't hold up too well.. :/
I was meaning to ask you how well your door seals held as well as how deep you were. I've been through a pond up to my door handles and not had major issues when I pulled my door panels there was a small leak from where i had removed and reinstalled the plastic sheet that closes off the window lift mechanics. and i quickly noticed my back gate wasn't sealing as all the carpet back there had become saturated.
__________________
-Austin
A-Ha's Build
aha2988 is offline   Reply With QuoteReply With Quote
Old 12-03-2012, 06:15 PM #18
emelianenkov's Avatar
emelianenkov emelianenkov is offline
Elite Member
 
Join Date: Dec 2010
Location: Andover, MA
Age: 29
Posts: 5,425
Real Name: Alex
emelianenkov is on a distinguished road
emelianenkov emelianenkov is offline
Elite Member
emelianenkov's Avatar
 
Join Date: Dec 2010
Location: Andover, MA
Age: 29
Posts: 5,425
Real Name: Alex
emelianenkov is on a distinguished road
Quote:
Originally Posted by aha2988 View Post
I was meaning to ask you how well your door seals held as well as how deep you were. I've been through a pond up to my door handles and not had major issues when I pulled my door panels there was a small leak from where i had removed and reinstalled the plastic sheet that closes off the window lift mechanics. and i quickly noticed my back gate wasn't sealing as all the carpet back there had become saturated.
Went up to the hood with the bow wave. Probably to the window on the passenger side. I got a trickle of water on the top of the carpet. Took the door sill panels out and there was water. Ended up removing the carpet to find a LOT of sand there, and I was only in for about 30 seconds.



Definitely something I don't want to do again.
__________________
-07 FJ Cruiser 6MT. 185k. Camburg 3.5" Long Travel.
-17 Subaru WRX STI. 305AWHP/311AWTQ. Warranty delete.
-13 Subaru Crosstrek CVT. / 05 Subaru Outback limited 5MT. Flip project.
-99 Ford F-250 Super Duty Lariat 4x4. 7.3 PowerStroke. SCLB.
-93 Toyota Pickup Crawler 5MT Solid axle swap. 37's. / 82 Yota Pickup.
emelianenkov is offline   Reply With QuoteReply With Quote
Old 12-04-2012, 12:52 PM #19
aha2988's Avatar
aha2988 aha2988 is offline
Senior Member
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
aha2988 aha2988 is offline
Senior Member
aha2988's Avatar
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
Quote:
Originally Posted by emelianenkov View Post
Went up to the hood with the bow wave. Probably to the window on the passenger side. I got a trickle of water on the top of the carpet. Took the door sill panels out and there was water. Ended up removing the carpet to find a LOT of sand there, and I was only in for about 30 seconds.



Definitely something I don't want to do again.
right on, any pics of the truck going through? Since I've installed a snorkel ironically I've found myself venturing less an less towards water and mud. I've had to replace the idler pulley, fan clutch, three wheel bearings, rear third member and front passenger side caliper. all were lost to water or mud damage. I've lost a tail light to rock crawling, oh and a driver side mirror glass lol I've found more interest in rock crawling haha.
__________________
-Austin
A-Ha's Build
aha2988 is offline   Reply With QuoteReply With Quote
Old 12-04-2012, 03:27 PM #20
emelianenkov's Avatar
emelianenkov emelianenkov is offline
Elite Member
 
Join Date: Dec 2010
Location: Andover, MA
Age: 29
Posts: 5,425
Real Name: Alex
emelianenkov is on a distinguished road
emelianenkov emelianenkov is offline
Elite Member
emelianenkov's Avatar
 
Join Date: Dec 2010
Location: Andover, MA
Age: 29
Posts: 5,425
Real Name: Alex
emelianenkov is on a distinguished road
Quote:
Originally Posted by aha2988 View Post
right on, any pics of the truck going through? Since I've installed a snorkel ironically I've found myself venturing less an less towards water and mud. I've had to replace the idler pulley, fan clutch, three wheel bearings, rear third member and front passenger side caliper. all were lost to water or mud damage. I've lost a tail light to rock crawling, oh and a driver side mirror glass lol I've found more interest in rock crawling haha.
Nope no pics of me

Here's my buddy's FJ. I got further in than that, so you can tell that thing is DEEP. I was all the way in with my doors about parallel with that tree near the bank.

His FJ is taller than my truck

An F-150 that went swimming and got like 5" of water inside

I didn't think it was that bad... If only I knew then.. Haha. I forgot all about the carpet padding and such. It absorbed a LOT of water!

__________________
-07 FJ Cruiser 6MT. 185k. Camburg 3.5" Long Travel.
-17 Subaru WRX STI. 305AWHP/311AWTQ. Warranty delete.
-13 Subaru Crosstrek CVT. / 05 Subaru Outback limited 5MT. Flip project.
-99 Ford F-250 Super Duty Lariat 4x4. 7.3 PowerStroke. SCLB.
-93 Toyota Pickup Crawler 5MT Solid axle swap. 37's. / 82 Yota Pickup.
emelianenkov is offline   Reply With QuoteReply With Quote
Old 01-15-2013, 04:41 PM #21
ThePMFG's Avatar
ThePMFG ThePMFG is offline
Member
 
Join Date: Sep 2012
Location: Biloxi, dirty south
Age: 39
Posts: 169
ThePMFG is on a distinguished road
ThePMFG ThePMFG is offline
Member
ThePMFG's Avatar
 
Join Date: Sep 2012
Location: Biloxi, dirty south
Age: 39
Posts: 169
ThePMFG is on a distinguished road
So would you recommend the internal snorkel or the outer snorkel (if you don't have a problem with the appearance of the outer safari snorkel)? Not that I plan on sinking my t4r up to the roof or anything... But just a snorkel for piece of mind when out playing.
__________________
2004 SR5 4WD, front-toytec/5100's, rear-metal tech/ICON long travel, 285/65R18 TW Wardens, Shrockworks bumper w/9500 winch, RCI front skid, BAMF LCA skids and sliders, WMW roof rack, CBI premium tire carrier, Trail Toys NSA box for some fun stuff, Scuba Mod, VSC Mod, HCF Delete, K&N, ScanGaugeII, Optima Redtop, interior LED swap, Cobra 29LTD Chrome, Panasonic Double Din DVD touchscreen w/ipod hookup, weathertech digifit f-r-c.
ThePMFG is offline   Reply With QuoteReply With Quote
Old 01-15-2013, 05:13 PM #22
aha2988's Avatar
aha2988 aha2988 is offline
Senior Member
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
aha2988 aha2988 is offline
Senior Member
aha2988's Avatar
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
Quote:
Originally Posted by ThePMFG View Post
So would you recommend the internal snorkel or the outer snorkel (if you don't have a problem with the appearance of the outer safari snorkel)? Not that I plan on sinking my t4r up to the roof or anything... But just a snorkel for piece of mind when out playing.
If you don't mind the look or price of a safari style snorkel I'd go that rout.

I decided to use this method because A.) it was cheap I had most of the parts in my garage. and B.) If I want to remove it I don't have to purchase a new front right fender i can just plate weld the inner fender and patch the holes. I can't say adding this item has made me want to see how deep i can go in a water crossing situation but its given me plenty of peace of mind to run through just about anything I've come across.
__________________
-Austin
A-Ha's Build
aha2988 is offline   Reply With QuoteReply With Quote
Old 01-15-2013, 08:07 PM #23
BlackWorksInc's Avatar
BlackWorksInc BlackWorksInc is offline
Elite Member
 
Join Date: Feb 2011
Location: Bend, OR
Posts: 9,906
BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold
BlackWorksInc BlackWorksInc is offline
Elite Member
BlackWorksInc's Avatar
 
Join Date: Feb 2011
Location: Bend, OR
Posts: 9,906
BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold BlackWorksInc is a splendid one to behold
I think the door seals would hold up decently to standing water, probably a little more so if you put some compressible foam tubing the hollow of the seals to add more pressure when the door closes to create a tighter seal. The problem is that just because the door openings are sealed doesn't mean the rest of the vehicle is going to be sealed. for example that little trim panel on the OUTSIDE edge of the door has holes into the body as does numerous other sections of the vehicle.

I had been toying with the idea of eventually stripping the entire body down to bare steel and sealing up everyting up to the window edge (as that will be the most difficult portion to effectively seal from outside water.) But the amount of work and effort required to do something like that would be monumentous and I don't know how effective it would be in waters close to hood level as again you have things such as the cowl, window glass moulding, ventilation holes. I also was unable to judge effectively how well the vent flap at the rear of the vehicle would hold up to water pressure from the outside. As you seem to have already shown, that flap is meant as a flimsy one way check valve to help dissapate pressure inside the vehicle, but even minor negative pressure seems to negate its protection from the outside.

Last edited by BlackWorksInc; 01-15-2013 at 08:09 PM.
BlackWorksInc is offline   Reply With QuoteReply With Quote
Old 01-15-2013, 10:31 PM #24
aha2988's Avatar
aha2988 aha2988 is offline
Senior Member
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
aha2988 aha2988 is offline
Senior Member
aha2988's Avatar
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
Quote:
Originally Posted by BlackWorksInc View Post
I think the door seals would hold up decently to standing water, probably a little more so if you put some compressible foam tubing the hollow of the seals to add more pressure when the door closes to create a tighter seal. The problem is that just because the door openings are sealed doesn't mean the rest of the vehicle is going to be sealed. for example that little trim panel on the OUTSIDE edge of the door has holes into the body as does numerous other sections of the vehicle.

I had been toying with the idea of eventually stripping the entire body down to bare steel and sealing up everyting up to the window edge (as that will be the most difficult portion to effectively seal from outside water.) But the amount of work and effort required to do something like that would be monumentous and I don't know how effective it would be in waters close to hood level as again you have things such as the cowl, window glass moulding, ventilation holes. I also was unable to judge effectively how well the vent flap at the rear of the vehicle would hold up to water pressure from the outside. As you seem to have already shown, that flap is meant as a flimsy one way check valve to help dissapate pressure inside the vehicle, but even minor negative pressure seems to negate its protection from the outside.
yep once you dive deeper than your rear cabin vents (well the level plain of your cargo floor the metal not the interior decking) your pretty much taking on water.

if that's only for a brief moment your probably fine however if your sitting there stuck.. well as I said before you'd have more problems than water inside your intake

the stock intake itself does a decent job of avoiding contact with water aside from bow waves that may splash enough water into the inner fender.

Personally I like my internal snorkel it sounds cool a lot of women seem to like it lol and it def adds a defense against water from entering the intake. I have yet to regret doing it. when I'm driving normal it's not even there. if I go to pass a car man it just opens up lol ill have to get a recording on here if I can come up with one worth a shit
__________________
-Austin
A-Ha's Build
aha2988 is offline   Reply With QuoteReply With Quote
Old 04-03-2013, 02:19 PM #25
wadle5's Avatar
wadle5 wadle5 is offline
Senior Member
 
Join Date: Jul 2012
Location: Iowa
Posts: 3,146
wadle5 will become famous soon enough
wadle5 wadle5 is offline
Senior Member
wadle5's Avatar
 
Join Date: Jul 2012
Location: Iowa
Posts: 3,146
wadle5 will become famous soon enough
Quote:
Originally Posted by aha2988 View Post
yep once you dive deeper than your rear cabin vents (well the level plain of your cargo floor the metal not the interior decking) your pretty much taking on water.

if that's only for a brief moment your probably fine however if your sitting there stuck.. well as I said before you'd have more problems than water inside your intake

the stock intake itself does a decent job of avoiding contact with water aside from bow waves that may splash enough water into the inner fender.

Personally I like my internal snorkel it sounds cool a lot of women seem to like it lol and it def adds a defense against water from entering the intake. I have yet to regret doing it. when I'm driving normal it's not even there. if I go to pass a car man it just opens up lol ill have to get a recording on here if I can come up with one worth a shit
So about that recording. . . . . . . .?
__________________
-2013 T4R SR5-MYSALSA-KO2's
-(SOLD)2006 T4R SR5. Nautical Blue Metallic. 255/70/17 General AT2. LED Interior Swap. Toytec Ultimate 3inch lift/Icon 2.0s Rear, SHROCKWORKS Front Bumper, OEM FJ wheels, WM Roofrack, slowly working it up. My Build thread HERE
-(SOLD)2005 Subaru Impreza WRX STi. BMW Mica Blue paint job. Cobb stage 2 tuning. Other modifications.
wadle5 is offline   Reply With QuoteReply With Quote
Old 04-03-2013, 02:43 PM #26
aha2988's Avatar
aha2988 aha2988 is offline
Senior Member
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
aha2988 aha2988 is offline
Senior Member
aha2988's Avatar
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
Quote:
Originally Posted by wadle5 View Post
So about that recording. . . . . . . .?
yeah I recorded it that day and tried to load it to youtube. It was taking forever to load so I just walked away from the computer..

I'll get it loaded this afternoon scouts honor!
__________________
-Austin
A-Ha's Build
aha2988 is offline   Reply With QuoteReply With Quote
Old 04-05-2013, 06:49 PM #27
aha2988's Avatar
aha2988 aha2988 is offline
Senior Member
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
aha2988 aha2988 is offline
Senior Member
aha2988's Avatar
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
As I've tried to say I would do so many times finally here is a video you can watch and listen in on the sound the internal snorkel produces.

internal snorkel sound - YouTube

It shows different RPM ranges, speeds, variations of getting on an off the throttle as well as just cruising at normal speeds.

took the video on the way home from work hope it answers any questions you may have.

yeah the inside of my truck is as muddy as the outside so what...
__________________
-Austin
A-Ha's Build
aha2988 is offline   Reply With QuoteReply With Quote
Old 04-05-2013, 10:55 PM #28
wadle5's Avatar
wadle5 wadle5 is offline
Senior Member
 
Join Date: Jul 2012
Location: Iowa
Posts: 3,146
wadle5 will become famous soon enough
wadle5 wadle5 is offline
Senior Member
wadle5's Avatar
 
Join Date: Jul 2012
Location: Iowa
Posts: 3,146
wadle5 will become famous soon enough
Can I just say that sounds actually amazing. I would do it just for the sound it makes.

Oh and you missed a little spot of mud on your dash....haha
__________________
-2013 T4R SR5-MYSALSA-KO2's
-(SOLD)2006 T4R SR5. Nautical Blue Metallic. 255/70/17 General AT2. LED Interior Swap. Toytec Ultimate 3inch lift/Icon 2.0s Rear, SHROCKWORKS Front Bumper, OEM FJ wheels, WM Roofrack, slowly working it up. My Build thread HERE
-(SOLD)2005 Subaru Impreza WRX STi. BMW Mica Blue paint job. Cobb stage 2 tuning. Other modifications.
wadle5 is offline   Reply With QuoteReply With Quote
Old 04-08-2013, 08:37 AM #29
aha2988's Avatar
aha2988 aha2988 is offline
Senior Member
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
aha2988 aha2988 is offline
Senior Member
aha2988's Avatar
 
Join Date: Feb 2011
Location: Monroe, North Carolina
Age: 35
Posts: 2,683
Real Name: Austin
aha2988 will become famous soon enough aha2988 will become famous soon enough
Quote:
Originally Posted by wadle5 View Post
Can I just say that sounds actually amazing. I would do it just for the sound it makes.

Oh and you missed a little spot of mud on your dash....haha
yeah it's really not annoying at all when cruising you barely realize its there unless your listening for it or the radio's off. Also Everyone that's ridden in the truck has really enjoyed it. I've had multiple comments like "that sounds awesome", "is that a turbo?" (lol), "what is that?" lol
__________________
-Austin
A-Ha's Build
aha2988 is offline   Reply With QuoteReply With Quote
Old 09-05-2013, 05:33 AM #30
808g19's Avatar
808g19 808g19 is offline
Member
 
Join Date: May 2011
Location: Nevada
Age: 45
Posts: 347
Real Name: 4th Gen T4R Crew Member #413
808g19 is on a distinguished road
808g19 808g19 is offline
Member
808g19's Avatar
 
Join Date: May 2011
Location: Nevada
Age: 45
Posts: 347
Real Name: 4th Gen T4R Crew Member #413
808g19 is on a distinguished road
With your a/c on full blast, you've got cold air intake.
__________________

2004 T4R SR5 V8|Front: Toytec/Eibach's 620lbs coils with Bilstein 5100, Camburg Ball Joint UCA, Total Chaos stock lengh LCA with TC cam gussets. | Rear: Bilstein 5100's with ICON 2" springs and driver side daystar 1.5 spacer, WabFab rear swaybar links. | Wheels & Tires: FJ 8 hole Wheels with 265/70R17 General Grabber ATX. | Exhaust: Gibson stainless steel cat back exhaust.
808g19 is offline   Reply With QuoteReply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Internal snorkel waterproofing question DewRunner 3rd gen T4Rs 17 04-23-2012 09:20 PM
Air Cleaner & Internal Silencer/Resonator Bretski1 For Sale: T4R Items 1 04-19-2012 01:03 AM
Internal Trim Removal phillyd2 5th gen T4Rs 15 10-01-2011 06:55 PM
internal bike rack silversx 5th gen T4Rs 16 06-23-2011 11:21 AM
Is there an Internal Filter in the car? ssabripo 4th Gen T4Rs 2 09-21-2004 11:20 AM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 07:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020