Toyota 4Runner Forum - Largest 4Runner Forum - 1989 wheels fitment question

Toyota 4Runner Forum - Largest 4Runner Forum (https://www.toyota-4runner.org/)

- Classic T4Rs (https://www.toyota-4runner.org/classic-t4rs/)

- - 1989 wheels fitment question (https://www.toyota-4runner.org/classic-t4rs/312578-1989-wheels-fitment-question.html)

1989 wheels fitment question

Hi all,
I have 2 1989 trucks, an FJ62 Landy and a 4Runner. The 62 is heavily modified and I'm no longer using the stock chrome wheels. Does anyone know offhand if the bolt pattern and offsets are compatible with the 4R? I'd like to swap them over if it's a direct fit.

Thanks, J

I'm not a smart man, but Tirerack.com indicates both are 6x139mm. Only one way to be 100% certain...

Quote:

Originally Posted by justinf (Post 3820732)

Both vehicles share a 6x139.7 bolt pattern, making them compatible for a swap. However, before you dive in, consider the offsets.

The FJ62 typically has a positive offset, while the 4Runner might have a more neutral offset. It's important to check the specific offset values for each set of wheels to ensure the right clearance and handling characteristics. Also, look into the tire sizes on each set, since differences there could mess with the overall fit.

If the offsets are within an acceptable range and tire sizes are similar, you should be good to roll with a direct fit. Just keep an eye on the suspension clearance and alignment after the swap to ensure optimal performance.