Toyota 4Runner Forum - Largest 4Runner Forum

Toyota 4Runner Forum - Largest 4Runner Forum (https://www.toyota-4runner.org/)
-   3rd gen T4Rs (https://www.toyota-4runner.org/3rd-gen-t4rs/)
-   -   Toytech eibach out of stock? (https://www.toyota-4runner.org/3rd-gen-t4rs/115995-toytech-eibach-out-stock.html)

blackbuzzard 05-21-2012 09:25 PM
Toytech eibach out of stock?
 
Hey guys i don't have my build thread started yet cause i'm just collecting parts but the plans are lc 7.5 wraps and billie 5125's in the rear and tundra 5100's and eibach springs in the front the problem is toytech is out of the eibachs and they don't know when they will have any back in, so do any of you guys know where i can get them besides toytech. Thanks for your help.

Shibby! 05-21-2012 11:07 PM
Quote:
Originally Posted by blackbuzzard (Post 1074451)
Hey guys i don't have my build thread started yet cause i'm just collecting parts but the plans are lc 7.5 wraps and billie 5125's in the rear and tundra 5100's and eibach springs in the front the problem is toytech is out of the eibachs and they don't know when they will have any back in, so do any of you guys know where i can get them besides toytech. Thanks for your help.
I'd like to know this as well. Since it's an Eibach part, do any of those who have them still branded as Eibach know the part number? Conveniently they don't share the Eibach numbers, only their internal numbers on the webpage. There are tones of places that sell Eibach springs and can probably get them.

I called today and they said not till next month, maybe later!

It's the only piece I can't purchase at the moment to get my build proceeding too!

ToyTec Lifts 05-21-2012 11:17 PM
The Toytec/Eibach spring is made specifically for us so yes, we are the only place that has them.

We have no ETA at this time. Could be awhile :(

Shibby! 05-21-2012 11:22 PM
Just read on the FJ forum (which appears to use the same spring for a 1.6" lift) that somebody talked to Eibach and they said they were exclusive to Toytech.

This sucks. Piss poor when an exclusive supplier doesn't have stock =(

Shibby! 05-22-2012 12:33 AM
Quote:
Originally Posted by ToyTec Lifts (Post 1074590)
The Toytec/Eibach spring is made specifically for us so yes, we are the only place that has them.

We have no ETA at this time. Could be awhile :(
Looks like you beat me to it.

Sorry about my comments. I'm just really bummed. With my summer schedule this bumps me back into the fall for a completion. These are the facts of life though.

ToyTec Lifts 05-22-2012 10:35 AM
Quote:
Originally Posted by Shibby! (Post 1074651)
Looks like you beat me to it.

Sorry about my comments. I'm just really bummed. With my summer schedule this bumps me back into the fall for a completion. These are the facts of life though.
No worries i understand. The Purchase order for 600 of these springs was sent to Eibach over 3 months ago, this is a part number we sell a large volume of, we have made every attempt to keep these in stock but Eibach is way behind, an order that takes 1 month normally is now over 3 months.
The Eibach part number is listed on our website but it has not been sold by Eibach with that part number for over 2 years, I doubt there are any suppliers who still have them in stock.
892-620 Replaced by 112-620; same spring except now has Toytec's name on it.

blackbuzzard 05-22-2012 06:37 PM
thanks for the replys, if anybody has any they want to get rid of :) let me know.

Volley 05-22-2012 09:13 PM
Just install the 5100 at 2.5" (and add a small top plate spacer if you want 3 full inches) for now and you will be golden and save cash. Don't get me wrong, I like my Eibachs, but probably would have saved the $ if I had to do it again...

blackbuzzard 05-22-2012 09:52 PM
yeah i think i'll just run my stock springs on the third notch , even though they will ride rough, untill the eibach are back in stock.:redbrick:

spitvenom 05-23-2012 06:02 AM
Quote:
Originally Posted by blackbuzzard (Post 1075474)
yeah i think i'll just run my stock springs on the third notch , even though they will ride rough, untill the eibach are back in stock.:redbrick:
would stock 4runner springs on 5100 tundra on the 3rd notch give any lift?

spitvenom 05-24-2012 01:32 AM
anyone?

Volley 05-24-2012 10:50 AM
I have the Tacoma 5100s, not sure about the Tundra ones on stock springs but I can't imagine why it wouldn't work as long as the springs have enough diameter for the shock to fit... I'm sure someone here has done it, see what a search brings up.


All times are GMT -4. The time now is 09:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger