Toyota 4Runner Forum - Largest 4Runner Forum

Toyota 4Runner Forum - Largest 4Runner Forum (https://www.toyota-4runner.org/)
-   5th gen T4Rs (https://www.toyota-4runner.org/5th-gen-t4rs/)
-   -   CBI Roof Rack for 5th Gen 4Runner (https://www.toyota-4runner.org/5th-gen-t4rs/267245-cbi-roof-rack-5th-gen-4runner.html)

TotalAutomotiveLV 01-10-2019 03:49 PM

CBI Roof Rack for 5th Gen 4Runner
 
One of the most popular Roof Racks for the 2010+ Toyota 4Runner.

CBI / Prinsu RoofRack Full Ė NON-DRILL

http://d5otzd52uv6zz.cloudfront.net/...38cc6b-800.jpg

Product comes powder coated black with black anodized aluminum
cross-bar extrusions.

One cross bar will not be anodized as it is intended to sit behind the
wind deflector.

Weight capacity of the racks varies based on the number of crossbars
used and their configuration.

CBI does expect all consumers to use good judgement and common
sense with the loads they plan to carry using these rack systems.

The 4Runner Roof Rack Full is a modular, adjustable, and completely
bolt together full length roof rack.

Other options includes;

3/4 Length model, and
7/8 Length model

To see all options - Click Here

The Roof Rack consists of 2 laser cut side rails constructed of 1/4″
5052 aluminum plate. These rails have 3 mounting tabs each that
will allow you to bolt the rack into the 4 factory mounting holes and
3m Industrial Adhesive on each side of the roof.

The crossbars are made from a 1″ x 2″ aluminum extrusion that
have 2 top facing T-slot channel, a fore and aft channel and 2
bottom facing channels.

This offers numerous solutions for tie down options, cargo security,
and the addition of accessories such as tool mounts or lighting.

The rack comes can be ordered with a bare aluminum finish but we
list options that are powdercoated.

All assembly hardware comes in a black zinc finish so as to match
a black paint or powdercoat finish on the final product.

All mounting hardware is either stainless steel or high quality zinc
plated.

The rack also includes a 1/8″ 5052 aluminum plate wind deflector to
help with aerodynamics and prevent wind noise.

If you are looking to add a light bar, just let us know if you need a...

30" Cutout available
40" Cutout available

This allows you to add your favorite LED Lighting option.

_

TotalAutomotiveLV 01-10-2019 03:56 PM

http://d5otzd52uv6zz.cloudfront.net/...fd5508-800.jpg

CBI Off-Road Fabrication has provided a current build time of 2-3 weeks.

When ordering online, Use Promo Code "T4R" for added savings on most brands.

_

YellowSnow 01-10-2019 03:59 PM

Are these in stock? Whatís the difference between ordering from you as opposed to CBI direct?

TotalAutomotiveLV 01-10-2019 05:18 PM

Quote:

Originally Posted by YellowSnow (Post 3206894)
Are these in stock? Whatís the difference between ordering from you as opposed to CBI direct?

The Roof Rack is fabricated to order based on the options you choose.

Like anything else, we an Authorized Dealer, so if we can extend a discount to forum members, we will try.

_

YellowSnow 01-10-2019 07:35 PM

Quote:

Originally Posted by TotalAutomotiveLV (Post 3206957)
The Roof Rack is fabricated to order based on the options you choose.

Like anything else, we an Authorized Dealer, so if we can extend a discount to forum members, we will try.

_

Awesome!

Agent_Outside 01-10-2019 10:50 PM

As someone who made the mistake of buying the Prinsu I can say it’s a terrible product, I actually replaced it with the Southern Style Off-road rack after a couple months.

Kenn 01-10-2019 11:05 PM

Any details on how the front mount is non-drill? I checked the CBI website and there is no info.

D1105 01-10-2019 11:27 PM

Quote:

Originally Posted by Kenn (Post 3207164)
Any details on how the front mount is non-drill? I checked the CBI website and there is no info.



I just installed mine today, hereís the non-drill part https://uploads.tapatalk-cdn.com/201...69b5f182fa.jpg

https://uploads.tapatalk-cdn.com/201...66d8438765.jpg


Sent from my iPhone using Tapatalk Pro

YellowSnow 01-11-2019 12:02 AM

Quote:

Originally Posted by Agent_Outside (Post 3207151)
As someone who made the mistake of buying the Prinsu I can say itís a terrible product, I actually replaced it with the Southern Style Off-road rack after a couple months.

What happened?

jpaws 01-11-2019 06:51 AM

My experience has been great with this rack. I have awning mounts, load panels, and all sorts of mounting goodies up top for my maxtrax and shovel. I feel it's well thought out and fit and finish are excellent. Just my opinion and experience.

Agent_Outside 01-11-2019 07:29 AM

Quote:

Originally Posted by YellowSnow (Post 3207207)
What happened?

Long story short: They shipped my rack with the no hardware, then they sent the wrong hardware, then they sent the wrong hardware again. Once I finally got enough wrong hardware to assemble it and make it work, it was half and inch difference in height left to right, the “flat” platform was actually concave from end to end, the pointy finger thing at the front of the side rail hit the roof on one side, one of the holes to mount the crossbar wasn’t fully cutout, the overall fit and finish was awful and design is just flat out bad, it’s a very generic get it close, make it work, and call it good type of design to it. They said the rails were defective and sent new ones which only addressed a couple of the issues and did absolutely nothing for some other ones, plus they were missing powder coat in places which they said was “normal”. The icing on the cake was from the very beginning I ordered it with an extra crossbar, they never sent the crossbar, and refused to refund it. They went from saying they would refund it and not doing it, to trying to claim they already issued a refund. It took months and involvement from the Better Business Bureau to get the money they stole back. I have nothing positive to say about the product or the company. I wish I bought the SSO rack the first time instead of the second time. Also just to clarify, I bought direct from Prinsu/CBI.

TotalAutomotiveLV 01-26-2019 12:05 PM

What a great response for 2019.

Roof Racks have a build time of 2-3 weeks, but we have been seeing them
ship within 2 so far.

We did have 1 order arrive with mounting hardware missing, but CBI shipped
out immediately for next day delivery.

_

TotalAutomotiveLV 02-18-2019 12:42 PM

CBI Roof Rack is a HOT MOVER!

Roof Racks have a build time of 2-3 weeks.

CBI is doing a great job getting orders processed and shipped quickly

Popular Choice...

NON-Drill, Full Rack, w/Noise Reducing Trim - Part #T4R5-RR-ND-STND-TRIM - Click Here

https://1vhtwi3ys8et3cms003zqdsw-wpe...RAC-FULL-1.jpg

_

TotalAutomotiveLV 02-28-2019 06:28 PM

Shipping Fast!!

Looking for a great Bolt-On Roof Rack for your 5th Gen 4Runner?

Check out what CBI has to offer - Click Here

_

3s1kill 04-06-2019 08:57 PM

Maybe it's an expired code but the T4R promo code at checkout doesn't work.


All times are GMT -4. The time now is 04:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger