Toyota 4Runner Forum - Largest 4Runner Forum

Toyota 4Runner Forum - Largest 4Runner Forum (https://www.toyota-4runner.org/)
-   Classic T4Rs (https://www.toyota-4runner.org/classic-t4rs/)
-   -   4R from North, *Accessories build time. (https://www.toyota-4runner.org/classic-t4rs/269185-4r-north-*accessories-build-time.html)

4RunnerSafari 02-22-2019 10:59 AM

4R from North, *Accessories build time.
 
3 Attachment(s)
Hello,got this car in Juni 2018, it looks good outside but rust was hidden as i aspected,but it came more and more..

Taking all rust of it that i can find and will take care of it in the future... both rear fender is fixed, and ready to get the fender flares install again outside.

Next Chapter was the rust on the frame parts, took down the fuel tank, sandblasted area around etc.. now im welding the frame some places it is crispy rust or thin sheet metals around... i have many pictures so i will upload when i have time...

After all rust is taken and protected i will begin to replace some parts on the car.

Martin Mendelson 02-23-2019 11:13 PM

Another from the North
 
My 2nd gen 1990 T4R was bought in Canada, and came to us in my father-in-law's will. He'd kept it garaged so much that in 2003 it had 18,000 miles on the clock. Then I had to store it on an outdoor lot for six years and the front rotors rusted so badly they had to be replaced. I hope your rotors did better.

mm

4RunnerSafari 02-25-2019 04:55 AM

8 Attachment(s)
Some more older Pictures..

4RunnerSafari 02-25-2019 04:56 AM

8 Attachment(s)
More old pics.

4RunnerSafari 02-25-2019 05:26 AM

7 Attachment(s)
More old fixes.

Dropzone 02-25-2019 10:35 AM

WOW! off to a great start. I admire your determination, a lot of folks would have said screw it. Lot of work!:hatsoff:

4RunnerSafari 03-08-2019 09:05 PM

3 Attachment(s)
Some sandblasting today before protect it and will begin to weld back together the crossover..

4RunnerSafari 03-10-2019 04:00 PM

Some welding today.. and fixed the passengerside window motor yesterday, it was totally stuck, full of crap, i did a good clean and turn the motor from hand, and lube it aswell to the end. good as new. https://uploads.tapatalk-cdn.com/201...572f7ed482.jpghttps://uploads.tapatalk-cdn.com/201...4e6b570b9c.jpghttps://uploads.tapatalk-cdn.com/201...889e43a023.jpghttps://uploads.tapatalk-cdn.com/201...83872461ac.jpghttps://uploads.tapatalk-cdn.com/201...733337fb8f.jpghttps://uploads.tapatalk-cdn.com/201...83c88b7792.jpghttps://uploads.tapatalk-cdn.com/201...9ab5282e31.jpghttps://uploads.tapatalk-cdn.com/201...607cd8921d.jpg

Sent fra min WAS-LX1 via Tapatalk

4RunnerSafari 03-14-2019 05:23 AM

5 Attachment(s)
Got a little time to prepare some new sheetmetals yesterday..

4RunnerSafari 03-16-2019 06:27 PM

More welding today.
Next will be to fix the diesel tank brackets.https://uploads.tapatalk-cdn.com/201...99cf84b8b5.jpghttps://uploads.tapatalk-cdn.com/201...c81a9e32e5.jpghttps://uploads.tapatalk-cdn.com/201...5cc77fbce2.jpg

Sent fra min WAS-LX1 via Tapatalk

4RunnerSafari 03-22-2019 04:47 AM

New bracket for the fueltank hangerbracket. all new sheets are in 3mm thickness. https://uploads.tapatalk-cdn.com/201...914d6ce469.jpghttps://uploads.tapatalk-cdn.com/201...8f3364c80b.jpghttps://uploads.tapatalk-cdn.com/201...1e8fe2c37a.jpghttps://uploads.tapatalk-cdn.com/201...2a96b889c1.jpg

Sent fra min WAS-LX1 via Tapatalk

Benny123 03-22-2019 05:03 AM

Pretty impressive and intensive. You've got to have passion and skills to get this far on this project. Congrats!

4RunnerSafari 03-22-2019 08:25 PM

Thanks, many future plans for the car keep me motivated to fix it, but very interesting in mechanic works too.

.

Just some finish details on the bracket today, and add some weldingprimer so it will dry for tomorrows welding. https://uploads.tapatalk-cdn.com/201...c1ac9c8818.jpghttps://uploads.tapatalk-cdn.com/201...2ce26129de.jpghttps://uploads.tapatalk-cdn.com/201...1fe4429695.jpg

Sent fra min WAS-LX1 via Tapatalk

4RunnerSafari 03-24-2019 05:41 PM

Bracket on, and the hangerbracket for the fueltank is fixed and ready for testfit.. https://uploads.tapatalk-cdn.com/201...3fa394e7dd.jpghttps://uploads.tapatalk-cdn.com/201...9a72276696.jpghttps://uploads.tapatalk-cdn.com/201...36169ff967.jpg

Sent fra min WAS-LX1 via Tapatalk

4RunnerSafari 03-26-2019 04:42 AM

Testfitted the tank with hangerbracket, spot welded it in right place, took it down again and welded it.. https://uploads.tapatalk-cdn.com/201...c42687ebfc.jpghttps://uploads.tapatalk-cdn.com/201...efd89445bd.jpg

Sent fra min WAS-LX1 via Tapatalk


All times are GMT -4. The time now is 04:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger