Toyota 4Runner Forum - Largest 4Runner Forum
Page 1 of 5 1 2 3 Last »
Show 40 post(s) from this thread on one page

Toyota 4Runner Forum - Largest 4Runner Forum (https://www.toyota-4runner.org/)
-   5th gen T4Rs (https://www.toyota-4runner.org/5th-gen-t4rs/)
-   -   DARKEST tint for the rear window that isn't frustrating to see out of? (https://www.toyota-4runner.org/5th-gen-t4rs/271193-darkest-tint-rear-window-isnt-frustrating-see-out.html)

rob_dixon 04-06-2019 12:11 AM
DARKEST tint for the rear window that isn't frustrating to see out of?
 
I can only legally tint the front to 35%.

But for the sides and back I want full on limo. However, for the REAR window, I want to tint it so I can see out but people cant see in very well (i will park in in the city on occasion)

BUT I don't want to basically be blind in the rear because its TOO dark!!! Where at night, headlights appear as dimmed out lights.

What tints have you guys been running that has either frustrated you or you deemed perfect?

the_fornicator 04-06-2019 01:22 AM
I went 18% in the rear windows and love it. I couldnt go any darker from a comfort standpoint -any darker and i think night time driving would be a lot more stressful/unsafe.

AINOMOATACO 04-06-2019 01:45 AM
20% front, black out rears and back, 35% is too light. as for the back, thats what we have rear cameras for 😬

gakattack 04-06-2019 04:17 AM
Quote:
Originally Posted by the_fornicator (Post 3266775)
I went 18% in the rear windows and love it. I couldnt go any darker from a comfort standpoint -any darker and i think night time driving would be a lot more stressful/unsafe.
This is what we did. Looks great.

zw470 04-06-2019 06:09 AM
I had 18% all around on my Charger, looked perfect and wasn't a problem to see out of.

rob_dixon 04-06-2019 08:07 PM
Thanks all, it sounds like 18% is the way to go for the rear. I might get darker up front too and apparently these guys can tint the front windshield (clear) even to keep heat out.

Jemplyr77 04-06-2019 09:32 PM
I had 20% installed on all wi does and it looks great. Even hides the green front tint really well also.

Hans Moleman 04-06-2019 11:31 PM
I used 3M Crystalline 50 mainly for UV and heat rejection so my arms and face don’t get burned.

redneckj 04-07-2019 01:18 AM
I used Xpel XR+ 20% on the front 2 windows and Xpel XR+ 55% on the rear of the 4Runner. Looks great and heat rejection is incredible.

YouTube

Knuckledragger 04-07-2019 01:23 AM
I put 20% on my front two windows to match the factory rear 20%. It still isn’t dark enough for me. On sunny days, especially in the winter when the sun is low, you can see everything in my vehicle. I also don’t like the fact that the factory tint has a purple hue to it compared to the aftermarket tint with a green hue. It drives me crazy. When I get the time I’m going to run up to my tint guy to darken the rears.

Not sure what I’m going to do yet. I’m leaning towards 35% over 20% on the rears.

50% over 20% = 10%
35% over 20% = 7%
20% over 20% = 4%
5% over 20% = 1%

dirtydurley 04-07-2019 09:57 PM
I have 15% on all except windshield. It’s dark but not dark enough where I can’t see. I had limo on a car and it was super dark and exactly what i wanted. It was nice at the time but after that i stuck with 15% on my other vehicles.


Sent from my iPhone using Tapatalk

mr.walleye 04-07-2019 10:41 PM
1 Attachment(s)
I went full limo tint on the back 5 windows, didn't touch the 3 front and I LOVE IT!! you cant see anything in the back standing outside. doesn't bother me for night time driving either, I can see the headlight behind me, if they are closer than that, I just slow down, a lot.... till they back off and I can see their headlights...:dance:

kyle13 04-07-2019 10:58 PM
I retinted my 4runner twice before I got the perfect combo. I used 3M color stable on all windows except the windshield, which is 3M crystalline. Here is in my opinion the best percentages to do.

Driver and passenger = 5% (if u like dark)

Rear doors + small windows on doors = 20% over the factory 20%

Rear cargo area windows and rear windshield = 5% over factory 20%

Windshield = 60%

I had 5% over the factory 20% on the rear doors and it was to tough to look over your shoulder and see cars. Even during the day it was too dark, so I retinted it with 20% and it perfect. All the windows look uniform on the outside.


Sent from my iPhone using Tapatalk

zw470 04-08-2019 08:21 PM
Are you guys sure the factory rear windows are 20%? Mine don't look anywhere near that dark :nono:

a47chuck 04-08-2019 09:37 PM
Quote:
Originally Posted by zw470 (Post 3268386)
Are you guys sure the factory rear windows are 20%? Mine don't look anywhere near that dark :nono:
Had mine done In 20% and they match pretty close. Did the moon roof in 5%.


All times are GMT -4. The time now is 06:47 PM.
Page 1 of 5 1 2 3 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger