Victory 4x4 New Products/Prototyping
 

Hello all, my name is Cam from Victory 4x4. If you haven't heard of us, perhaps you have heard of our sister company, JcrOffroad. We are a manufacturer out of Michigan. We operate out of 32,000sqft, have 30 employees and do everything in-house. From laser cutting to bending, fabrication to powder coat. This allows us to stay around a 2 week lead time or less!

Recently we've been getting a bunch of request for Lexus GX parts. We were able to get our hands on a 2011 GX460 and will be digging in on producing parts for it. We have a GX470 scheduled to show up in a couple of weeks as well!

I've been doing a lot of research and reading a lot of threads. What are the products that you want to see for the GX (either model) that isn't available or is difficult to get?

I'll update you guys as we go on the GX460 we are currently working on.

Check out our site to see what we currently have available for the 4Runner!

Victory 4x4 - There & Back

Great to hear. The "4 runner on steroids" is finally going to get some badly needed aftermarket goodies.
Ours is a 2017 GX460.
A full skid plate over the gas tank would be nice.
Front bumpers and running board/rock sliders.
The break over angles are atrocious on the GX460.
A rock roller for the receiver hitch would also be nice.

There aren't too many good dual swing GX470 rear armors out there.

- Table tray for the rear door.
- One thing that land cruisers have that GXs want are the side window doors. I wonder if you can do something with that.

Skid plates coming soon, including the gas tank skid!

https://uploads.tapatalk-cdn.com/201...bc24f303c3.jpg


Sent from my iPhone using Tapatalk

Anyway you can put a access door for the oil filter also? From the image it looks like you have to remove the skid plate to gain access and drain the filter housing...

That access panel is for the oil filter, the hole towards the back of the skid is the oil drain.

That access door looks more like for a 4Runner (V6 motor). On a Lexus GX460 (V8 motor) from your picture it is more close to the left of your logo. You might want to get a GX460 and check if you haven't.

These were prototyped on a 460. We may have slightly widened it since the prototype photo but it allows enough room for the oil filter wrench.

Skid System Now Available!
 

Our GX skid system is now available! Front, mid, transfer case, and gas tank skids.

Designed to protect your truck in serious rock crawling and make oil changes easier!

• CNC cut and formed from 3/16" steel or 1/4" aluminum (mounting brackets will be steel on aluminum option)
• Frame mounted
• Works with KDSS
• Hardware Included
• Made in the USA
• Free shipping!

Lexus - Victory 4x4

Nice, Thanks. Now about a front and rear bumper.... LOL

Eventually!

Rear Window MOLLE Panel Now Available!
 

Now available for the GX460!

Designed to maximize the storage space in the rear cargo area. Offers customizable mounting for tools and gear. Comes coated with a 2 stage satin textured black powder coat over durable zinc primer finish.

• CNC cut and formed from .120" steel.
• Sold individually
• Works on either side of the vehicle.
• Retains the stock cargo net mounts and seat belt clips.
• Proudly designed and made in the USA.
• Free Shipping!

GX Rear Window MOLLE Panel - Victory 4x4

GX460 Blitz Rock Sliders/Steps coming soon!

• Frame mounted
• Built-in LED rock/courtesy lights
• Built-in Hi-Lift jack points

Have you done a GX470 skidplate setup yet? Non-KDSS here! Needs to be able to do oil changes without removal, please!

GX470 Blitz Sliders Coming Soon!
 

Blitz Sliders for the 470 coming soon!