-
5th gen T4Rs
(
https://www.toyota-4runner.org/5th-gen-t4rs/)
- -
rear license plate
(
https://www.toyota-4runner.org/5th-gen-t4rs/277055-rear-license-plate.html)
TCLLC |
09-01-2019 12:58 PM |
rear license plate
1 Attachment(s)
so, after 10 months I went to take off my rear plate to wax and clear behind it. the screws were stuck. i finally got them out and coated with fluid film, a year later i took it off and the plate rusted on the paint. i got that off and yes the screws came out easy this time.
however what to do for the rust? i had the plastic plate from the dealer behind my plate but the bottom edge rusted and stained my truck. i found this on amazon, its a silicone holder for the plate. it has the added benefit of not rattling and makes the whole tailgate seem solid when i close it now
the only thing i will warn you of, the silicone holder is a tight fit and if you are not careful you will bend your plate
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
|
BobsTrail |
09-01-2019 01:10 PM |
I put a strip of velcro behind the bottom of the plate. Made it a little tighter so it did not dance on the paint, rattle or wear it off.
|
CavPro |
09-01-2019 01:11 PM |
I have this and it is a great solution. No rattle snug fit. There is a right-side-up, look for the drain slits along the edge.
|
Banzai |
09-01-2019 02:21 PM |
You can get weatherproof license plate covers. I believe Weathertech makes one. For screws, either stainless steel or nylon.
|
Charlievee |
09-01-2019 03:36 PM |
Found that a few months back when i registered in the swmaps. Needed a holder that did not cover the plate. They work well. Just wish the TuRD had 4 screws to secure it.
|
rayofsi |
09-02-2019 01:50 PM |
i have these silicone ones too. works great
|
Can I still use a license plate frame with this?
|
LandCruiser |
09-02-2019 04:11 PM |
I just put the shitty plastic "I was completely screwed at douchebag automart" dealer plates behind my front and rear metal license plates. That's mostly to keep them from clattering, I long ago gave up on rust.
|
Charlievee |
09-02-2019 06:42 PM |
Quote:
Originally Posted by LRT
(Post 3348944)
Can I still use a license plate frame with this?
|
I just check and you absolutely can. Thank you for the idea.
|
YelloLab |
09-05-2019 07:44 AM |
I have one of these silicone LP frames in first post in black and they are great!
|
Cadesun |
09-05-2019 09:07 AM |
That had been driving me nuts too! Ordered, thanks!
|
All times are GMT -4. The time now is 09:22 AM. |
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by
DragonByte SEO (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by
Advanced User Tagging (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger