Toyota 4Runner Forum - Largest 4Runner Forum

Toyota 4Runner Forum - Largest 4Runner Forum (https://www.toyota-4runner.org/)
-   3rd gen T4Rs (https://www.toyota-4runner.org/3rd-gen-t4rs/)
-   -   Ignition coil bolt size? (https://www.toyota-4runner.org/3rd-gen-t4rs/281011-ignition-coil-bolt-size.html)

RandyBobandy 12-21-2019 05:13 PM

Ignition coil bolt size?
 
Anyone know the size of the bolt holding the ignition coil in place? I need to pick up a new one at the hardware store tomorrow and canít find the size anywhere

brillo_76 12-21-2019 05:50 PM

Quote:

Originally Posted by RandyBobandy (Post 3412711)
Anyone know the size of the bolt holding the ignition coil in place? I need to pick up a new one at the hardware store tomorrow and canít find the size anywhere

Oh I can find out on my parts rig. I think it's a 12mm {wrong 10mm flare head} and probably 6mm x1.25 thread {6mm X1.0 Thread and 7/8 inch of threads} However, I have to pull one off my parts rig to verify the length and the threads. You have one vibrate loose and fall out? These are guesses so dont take them as absolutes until verified.

Sent from my SM-J337V using Tapatalk

Ed_C 12-21-2019 06:00 PM

6mm x 1.0, 10mm head,Ace Hardware usually has a good selection of metric; I'd remove one of mine to measure length but it's below freezing at the moment. Bring one of the remaining two coil bolts with you.

RandyBobandy 12-21-2019 06:06 PM

Thank you, I actually have one bolt that I think is the wrong size and is coming loose, I got a CEL yesterday for a cylinder 5 miss, and in the process of testing the coil packs and checking the plug I noticed the different bolt.

I remember noticing the mismatched bolt when I did the plugs a while ago but didnít give it much thought, however after reinstalling the coil packs and tightening the bolt I took it for a drive and noticed a lot more power going up hills and no return of the code, I think the bolt being loose caused an intermittent misfire, but I wonít be sure until I can drive it more and see if the code follows the coil

brillo_76 12-21-2019 06:19 PM

Yup I was wrong 10mm flange head 6x1.0 thread 7/8 inch long threads only longhttps://uploads.tapatalk-cdn.com/201...0c51e63238.jpghttps://uploads.tapatalk-cdn.com/201...63ad0f215d.jpg

Sent from my SM-J337V using Tapatalk

RandyBobandy 12-21-2019 08:14 PM

Awesome thanks for the help


All times are GMT -4. The time now is 02:03 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger