-
4th Gen T4Rs
(
https://www.toyota-4runner.org/4th-gen-t4rs/)
| SHagood |
01-30-2020 12:59 AM |
4th Gen Rear Bumper Options
Calling all 4th gen owners with rear bumpers.. post pics and feedback of your rear bumper setup. I have the Wilco Tire Carrier but I'm leaning towards getting a high clearance dual-swing out bumper.
Thoughts?
|
| JuniorPigeon |
01-30-2020 10:31 AM |
I got together with RLC Welding & Fabrication right here in Louisville to be the 4th gen guinea pig. I specifically wanted a single swing-out since my cooking drawer pulls out on the passenger side and I didn't want anything behind me. I chose to go with Rotopax mounting and a pocket for an S2 flush mount, but those little things can be customized.
This might be a tease, since they're not primarily an off-road shop I'm not sure if he's interested in reproducing a non-standard bumper (the 4th gen was a chore). But you can always give the owner a call and see what they have going on. Super nice guy and easy to work with.
RLC Welding – RLCWELDFAB
https://live.staticflickr.com/65535/...34f433ae_c.jpg
Only decent picture I have right now. |
| gfxcruncher |
01-30-2020 12:15 PM |
2 Attachment(s)
This probably isn't going to help you any...
I couldn't find a full replacement that I really liked, and I do like the lines on the stock cover. Made swing outs that bolt to the frame.
|
| montijo505 |
01-30-2020 02:07 PM |
Quote:
Originally Posted by gfxcruncher
(Post 3433831)
This probably isn't going to help you any...
I couldn't find a full replacement that I really liked, and I do like the lines on the stock cover. Made swing outs that bolt to the frame.
|
You have pics of the process? Or more detailed pics of how it’s mounted? Looks awesome!
Sent from my iPhone using Tapatalk
|
| gfxcruncher |
01-30-2020 02:30 PM |
1 Attachment(s)
Quote:
Originally Posted by montijo505
(Post 3433906)
You have pics of the process? Or more detailed pics of how it’s mounted? Looks awesome!
|
Thanks! I don't wan't to go hijacking the thread... Here's a pic under the cover while it was in progress, removed the tie down/recovery loop under the frame and used those points, also added some weld in threaded insert things from McMaster on the top of the frame. There was also some additional bracing on the bracket that I added later.
I should do a build thread, but think I'm probably too lazy to keep up with it... lol
|
| royal T4R |
01-30-2020 02:46 PM |
Quote:
Originally Posted by gfxcruncher
(Post 3433831)
This probably isn't going to help you any...
I couldn't find a full replacement that I really liked, and I do like the lines on the stock cover. Made swing outs that bolt to the frame.
|
I actually am wanting to do the same to my rig, you mind if I shoot you a PM on how to build the thing?
I have a welder so can do all the fab work myself.
|
| montijo505 |
01-30-2020 04:41 PM |
Quote:
Originally Posted by royal T4R
(Post 3433947)
I actually am wanting to do the same to my rig, you mind if I shoot you a PM on how to build the thing?
I have a welder so can do all the fab work myself.
|
Also interested in this, cleanest swing outs I’ve seen. I don’t really have the need for a full bumper but need my full size spare. Currently on the RIGD Ultraswing but this looks cleaner and dual swingouts!
Sent from my iPhone using Tapatalk
|
| SHagood |
01-30-2020 07:01 PM |
Quote:
Originally Posted by JuniorPigeon
(Post 3433763)
I got together with RLC Welding & Fabrication right here in Louisville to be the 4th gen guinea pig. I specifically wanted a single swing-out since my cooking drawer pulls out on the passenger side and I didn't want anything behind me. I chose to go with Rotopax mounting and a pocket for an S2 flush mount, but those little things can be customized.
This might be a tease, since they're not primarily an off-road shop I'm not sure if he's interested in reproducing a non-standard bumper (the 4th gen was a chore). But you can always give the owner a call and see what they have going on. Super nice guy and easy to work with.
RLC Welding – RLCWELDFAB
https://live.staticflickr.com/65535/...34f433ae_c.jpg
Only decent picture I have right now.
|
Damn that thing is nasty!!! I love that look, super clean.
|
| SHagood |
01-30-2020 07:02 PM |
Quote:
Originally Posted by gfxcruncher
(Post 3433925)
Thanks! I don't wan't to go hijacking the thread... Here's a pic under the cover while it was in progress, removed the tie down/recovery loop under the frame and used those points, also added some weld in threaded insert things from McMaster on the top of the frame. There was also some additional bracing on the bracket that I added later.
I should do a build thread, but think I'm probably too lazy to keep up with it... lol
|
Arguably one of the most creative ideas I've seen. So clean and consistent with the OEM look of the 4th gen. I love it.
|
| gfxcruncher |
01-30-2020 07:21 PM |
Quote:
Originally Posted by SHagood
(Post 3434102)
Arguably one of the most creative ideas I've seen. So clean and consistent with the OEM look of the 4th gen. I love it.
|
Thanks man!
Gonna be straying from the OEM look on the front end soon... :naughty:
|
| ac1617 |
01-30-2020 07:34 PM |
Quote:
Originally Posted by gfxcruncher
(Post 3433831)
This probably isn't going to help you any...
I couldn't find a full replacement that I really liked, and I do like the lines on the stock cover. Made swing outs that bolt to the frame.
|
Man I love this so much, I have no need for a armored rear bumper but I love the utility of having a place to mount a spare and Jerry cans. That solution would be perfect without the additional weight of a rear bumper.
|
| xtremewlr |
01-30-2020 07:45 PM |
|
| apohl17 |
01-30-2020 07:45 PM |
Quote:
Originally Posted by gfxcruncher
(Post 3433831)
This probably isn't going to help you any...
I couldn't find a full replacement that I really liked, and I do like the lines on the stock cover. Made swing outs that bolt to the frame.
|
I've had an idea rolling around in my head that looks a lot like this, and seeing your pictures - definitely think this is what I'll be building in the future. Me likey. :cheers:
|
| gfxcruncher |
01-30-2020 08:32 PM |
wow, thanks everyone!
@ apohl17
&
@ SHagood
you guys have great build threads going, there's so many good ones on here. :cheers:
Seems like I should start one since 99% of my projects begin with some crazy idea someone has posted on here... Sorry for all the NON rear bumper option chatter. |
| All times are GMT -4. The time now is 12:47 AM. |
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by
DragonByte SEO (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by
Advanced User Tagging (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
