Toyota 4Runner Forum - Largest 4Runner Forum
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota 4Runner Forum - Largest 4Runner Forum (https://www.toyota-4runner.org/)
-   5th gen T4Rs (https://www.toyota-4runner.org/5th-gen-t4rs/)
-   -   2020 TRD PRO Lift Kit/Spacers (https://www.toyota-4runner.org/5th-gen-t4rs/284466-2020-trd-pro-lift-kit-spacers.html)

feelingstoned 03-29-2020 12:58 PM
2020 TRD PRO Lift Kit/Spacers
 
I've already read multiple threads on this but no one seems to link any actual parts. I love the fox suspension right now but just want to run 275s, what front spacers and wheel spacers do you guys recommend? Everything online says "does not fit PRO models".

Sent from my SM-G975U using Tapatalk

TRD PANTHER 03-29-2020 02:15 PM
1 Attachment(s)
Look up Jason Burtman Industries. He is a vendor on this forum and carries them for all the Pros. Although my Pro is a 2018, I went with a 1.5/1” setup with 275’s and like it.

daytonaviolet 03-29-2020 02:26 PM
2020 TRD PRO Lift Kit/Spacers
 
I have them too [emoji40]. 2/1.5 on 2018 Bilstein TRD pro suspension.


Burtman Industries

https://uploads.tapatalk-cdn.com/202...e21d86cae9.jpg

https://uploads.tapatalk-cdn.com/202...06d0c81de4.jpg

feelingstoned 03-29-2020 02:33 PM
Right on I checked him out and hes got good reviews. What tires are you guys running on the 2/1 setup? I dont wanna get rid of my TRD rims

Sent from my SM-G975U using Tapatalk

feelingstoned 03-29-2020 02:36 PM
Quote:
Originally Posted by daytonaviolet (Post 3464412)
Will the 2/1.5 setup require bigger shocks than the stock fox shocks in the front? And if so I would probably go with bilestine. Can you link the TRD pro bilestine? [emoji16]

Sent from my SM-G975U using Tapatalk

mcat707 03-29-2020 03:11 PM
2 Attachment(s)
I went with the 2/1.5 Cornfed spacer kit on my 2015 TRD Pro Bilstein suspension with 285/70/17 Falken Wildpeak MT’s. Had to trim down the fender lip edges with no other modifications done. Once this suspension setup blows out, I’ll probably upgrade to something else, but I expect it will last for years to come.

CRB Racing 03-29-2020 05:01 PM
2020 TRD PRO Lift Kit/Spacers
 
TRD PRO 5th Gen

David @Cornfed is the best!

The 2/1 kit are listed for the 19/20 with Fox suspension.
I had 2/1.5 on my 19 and it felt good. Stiffened up the suspension a bit. It still was very compliant off road, but felt stiffer on the street (in a good way) with less body roll.

Fast forward to the 2020...
Installed the 2/1 kit on my 2020 TRDP.
The front feels stiffer than the 2019. Maybe because the 20 has different valving. At times the rear appeared to be slightly lower.
I have since installed a 1.5 spacer and like the way it looks better.

With 2/1, 285/70/17.
https://uploads.tapatalk-cdn.com/202...64a649fb6a.jpg


Sent from my iPhone using Tapatalk

daytonaviolet 03-29-2020 06:07 PM
Quote:
Originally Posted by feelingstoned (Post 3464419)
Will the 2/1.5 setup require bigger shocks than the stock fox shocks in the front? And if so I would probably go with bilestine. Can you link the TRD pro bilestine? [emoji16]

Sent from my SM-G975U using Tapatalk


If you have 19/20 pro with fox, i believe Burtman makes the leveling kit. Not need to change shocks to the older pro Bilsteins.

daytonaviolet 03-29-2020 06:10 PM
Quote:
Originally Posted by mcat707 (Post 3464438)
I went with the 2/1.5 Cornfed spacer kit on my 2015 TRD Pro Bilstein suspension with 285/70/17 Falken Wildpeak MT’s. Had to trim down the fender lip edges with no other modifications done. Once this suspension setup blows out, I’ll probably upgrade to something else, but I expect it last for years to come.


I had to do small mount of trimming as well as pushing the liners forward. The trimming is not visible unless you look for it.

https://uploads.tapatalk-cdn.com/202...942307d2.plisthttps://uploads.tapatalk-cdn.com/202...9b81fe2d.plist

mcat707 03-29-2020 06:58 PM
3 Attachment(s)
Quote:
Originally Posted by daytonaviolet (Post 3464520)
I had to do small mount of trimming as well as pushing the liners forward. The trimming is not visible unless you look for it.
I used rubber automotive door edge guards to cover the trimmed edges on the fender. Looks much cleaner to me. I didn’t have to push the liners forward

feelingstoned 03-29-2020 08:34 PM
Quote:
Originally Posted by mcat707 (Post 3464438)
I went with the 2/1.5 Cornfed spacer kit on my 2015 TRD Pro Bilstein suspension with 285/70/17 Falken Wildpeak MT’s. Had to trim down the fender lip edges with no other modifications done. Once this suspension setup blows out, I’ll probably upgrade to something else, but I expect it will last for years to come.
Love the set up! Do you have a link for the bilestines? And I suppose I can re use the same front coils if using different shocks? Oh and last question...link to Cornfed spacer kit? I want to compare prices [emoji16]

Sent from my SM-G975U using Tapatalk

T3XAS4Runner 03-29-2020 08:39 PM
Quote:
Originally Posted by mcat707 (Post 3464438)
I went with the 2/1.5 Cornfed spacer kit on my 2015 TRD Pro Bilstein suspension with 285/70/17 Falken Wildpeak MT’s. Had to trim down the fender lip edges with no other modifications done. Once this suspension setup blows out, I’ll probably upgrade to something else, but I expect it will last for years to come.

What headlights are those?? They’re awesome

CRB Racing 03-29-2020 08:40 PM
Quote:
Originally Posted by feelingstoned (Post 3464591)
Love the set up! Do you have a link for the bilestines? And I suppose I can re use the same front coils if using different shocks? Oh and last question...link to Cornfed spacer kit? I want to compare prices [emoji16]

Sent from my SM-G975U using Tapatalk
Um, why would you replace the Fox with Billies?

feelingstoned 03-29-2020 08:42 PM
Quote:
Originally Posted by feelingstoned (Post 3464591)
Love the set up! Do you have a link for the bilestines? And I suppose I can re use the same front coils if using different shocks? Oh and last question...link to Cornfed spacer kit? I want to compare prices [emoji16]

Sent from my SM-G975U using Tapatalk
Wait sorry I already have the link to the last question

Sent from my SM-G975U using Tapatalk

feelingstoned 03-29-2020 08:43 PM
Quote:
Originally Posted by CRB Racing (Post 3464593)
Um, why would you replace the Fox with Billies?
Well I dont want to but I thought it was required for the 2/1.5? If I don't, can I still run 285s?

Sent from my SM-G975U using Tapatalk


All times are GMT -4. The time now is 10:47 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger