Adventure Runner Pre-Built Build Thread
Some of you might recall the member
@blackoutt
and his 2007 Galactic Limited, well for the past year and some change I've been the very proud owner of this baby right here and figured by now I've done enough to make a thread of my own/revive his build for those interested in information. I'm adv_runner on IG for some pretty alright content. I've been dealing with a slight sickness for almost a year, but now that it's getting better it's time to use this thing more!
As of last weekend on an impromptu, no gear camping trip here's how she sits. https://live.staticflickr.com/65535/...a27dae6c_z.jpg https://live.staticflickr.com/65535/...5722b8a0_z.jpg https://live.staticflickr.com/65535/...293c3da9_z.jpg https://live.staticflickr.com/65535/...145b1bd5_z.jpg The day I brought her home! https://live.staticflickr.com/65535/...40eecc82_z.jpg https://live.staticflickr.com/65535/...6430bc1d_z.jpg https://live.staticflickr.com/65535/...b487226c_z.jpg Things done before my ownership: Suspension - Fox 2.5 extended front coilovers w/ remotes and DSC - Fox 2.0 10" travel rear shocks - Dobinson 677V rear springs w/ 1.5" Daystar driver side spacer - SPC upper control arms - Icon SS shock skids/roost guards - Wheelers Super Bumps front and rear - StopTech extended stainless brake lines - Energy sway bar bushings and lateral lock collars - Diff breather extended to gas filler - 1" body lift - DIY EPDM fender liners - OEM front LCA w/ Moog BJ and Energy bushings - OEM rear control arms w/ Energy bushings - Toytec adjustable panhard bar Exterior/Armor - (5x) KMC 301 Turbines 17x9 -12 - (5x) Cooper STT Pros 295/70 - Prinsu full roof rack w/shorter spacers - White Knuckle Offroad DOM rock sliders - Metaltech rear lower link skids - Rocksteady aluminum front skid - Rocksteady aluminum trans skid - Rocksteady aluminum front bumper filler plate Interior/Camp - Adventure Index drawer system w/ sleeping platform - Partner Steel 22" stove - Dometic CFX 40W w/ bag - DFG tilting fridge slide - ARB fridge plug socket - Blue Sea dual USB charger in center console - Blue Sea dual USB charger in rear - USB fans - RAM phone mount - Anytime backup camera switch - Traction aids off button - Rear hatch LED lights wired to cargo switch Recovery/Tools - ARB CKMTA12 twin air compressor on custom mount Power - (2x) Odyssey Batteries 34R-PC1500T - Off Grid Engineering aux battery tray - Off Grid Engineering starter battery tie down - Starting battery spacer - GM OEM part# 12135037 alt-s diode - Dual battery voltage monitor in center console - Blue Sea SI ACR - Blue Sea fuse panel - Renogy 100W Eclipse solar panel Lighting - Eagle Eyes Sport headlight housings with G5-R retrofit - LED interior lights - LED step bar lights - Anytime fog light mod - TINman 3d printed sunglass holder switch plate Engine - Doug Thorley headers w/ 2.5" catless downpipes - Doug Thorley Y-pipe - Flowmaster super 50 SUV muffler - Resonator delete, side exit - HCF delete - URD O2 sensor simulator - AFE Pro Dry air filter - Smooth intake tube - Slyfox AIP bypass kit - Fumoto oil drain valve Since I've owned it: Exterior/Armor - (5x) SCS F5s 17x9 -38 - (5x) Goodyear DuraTracs 315/70 - RLC Fabrication one-off rear bumper with swingout - C4 Fabrication Lo-Pro front bumper Interior/Camp - ARB 2500 awning w/ mounts - 2 gallon water Rotopax mounted inside - Trasharoo tire bag Recovery/Tools - Warn VR8-S winch - Factor 55 fairlead - Factor 55 Flatlink-E - (2x) Maxtrax recovery boards - Treaty Oak 3/4" x 30' recovery rope - Treaty Oak 3/8" soft shackle - Treaty Oak tree saver - (2x) Van Beest 3/4" shackles - (2x) 4 gallon Rotopax fuel containers - 52" Plano case Lighting - Baja Designs Squadron-R fog lights on factory switch - Baja Designs S2 flush mount reverse light Future plans: - NTK Fab body mount relocation - Eimkeith panhard correction kit - ARB rear air locker - Brembo blank rotors w/ Hawk LTS pads - Indeflate 2 hose unit - Some snatch block - Cobra CB/Diamond mount/Firestik antenna - Safari snorkel w/ Syklone pre-cleaner |
For those interested in the drawers/bed/electrical that he put together here's some old picture of the process. I have all the details from old threads too for anyone if they need.
https://live.staticflickr.com/65535/...93c48407_z.jpg https://live.staticflickr.com/65535/...ea6f451c_z.jpg https://live.staticflickr.com/65535/...2079b084_z.jpg https://live.staticflickr.com/65535/...63e13879_z.jpg My first time out with it putting all these goodies to use. https://live.staticflickr.com/65535/...85d2a756_z.jpg The day of the new rear bumper. This was built by a local fab shop that intended to produce it, but since nixed that idea. https://live.staticflickr.com/65535/...34f433ae_z.jpg The new front bumper, winch, F55 stuff and S2 were all pretty straight forward. The fairlead and bumper weren't 100% plug and play which was a little disappointing. But all I had to was grind the bumper slightly on each side so make room. The wiring for the aux reverse light was already there from the old ones. https://live.staticflickr.com/65535/...12c7c321_z.jpg https://live.staticflickr.com/65535/...44a3a63f_z.jpg https://live.staticflickr.com/65535/...61885538_z.jpg https://live.staticflickr.com/65535/...cb3cda14_z.jpg Right after the new wheels and tires a couple of weeks ago. Completely rub free on the old 295s, but now I have some cutting on the front bumper to do and I want to relocated the body mount altogether. https://live.staticflickr.com/65535/...fdd3cd9e_z.jpg https://live.staticflickr.com/65535/...3e075ddd_z.jpg |
Wish I had the V8, that stance on the F5's and 315's makes my pants fit weird.
Sent from my SM-G986U using Tapatalk |
Quote:
Yeah same here, I knew I was gonna like the new wheel/tire combo but I had no idea I'd be so in love lol. |
That is one sexy beast!
|
Good looking setup! That rear bumper looks killer! Love the angles
Sent from my ONEPLUS A6013 using Tapatalk |
Quote:
Quote:
I've ordered the body mount relocation kit, and panhard correction kit. So'll have some in depth photos of that install. Super ready to have full wheel lock again and get rid of this adjustable sway bar and it's clunking heim. |
Looks great man, looking extra thicc with those 315s! I do like the rear bumper a lot, neat to have something unique!
|
Quote:
|
Quote:
Sent from my SM-G986U using Tapatalk |
Always loved this rig. Take good care of her, she will take great care of you!
|
Quote:
Quote:
Quote:
|
Great looking rig!
|
Quote:
Sent from my SM-G986U using Tapatalk |
Quote:
Quote:
|
All times are GMT -4. The time now is 04:25 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by
DragonByte SEO (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by
Advanced User Tagging (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger