-
4th Gen T4Rs
(
https://www.toyota-4runner.org/4th-gen-t4rs/)
- -
Oil Catch Can
(
https://www.toyota-4runner.org/4th-gen-t4rs/294769-oil-catch-can.html)
| toyoman25 |
02-09-2021 04:48 PM |
Oil Catch Can
I am putting one of these in here once the weather warms up. There is a few places I could mount it. Where has everyone put there's at?
|
| wsgoat |
02-10-2021 10:14 AM |
1 Attachment(s)
I mounted mine on the inside of the (drivers) front fender. There are a couple of factory, threaded holes, that can be used to mount a bracket. I had to fab a simple bracket to accommodate the can and hole location(s).
|
| toyoman25 |
02-10-2021 01:51 PM |
Thats where I was thinking as well. Found an old PC Desktop that will make a good bracket. By chance do you remember what size bolt you used ?
|
| montijo505 |
02-10-2021 03:56 PM |
Quote:
Originally Posted by wsgoat
(Post 3602810)
I mounted mine on the inside of the (drivers) front fender. There are a couple of factory, threaded holes, that can be used to mount a bracket. I had to fab a simple bracket to accommodate the can and hole location(s).
|
Which can did you use?
Sent from my iPhone using Tapatalk
|
| wsgoat |
02-10-2021 04:42 PM |
Quote:
Originally Posted by montijo505
(Post 3602963)
Which can did you use?
Sent from my iPhone using Tapatalk
|
I used the moroso can, but there are lots of choices and price-points out there.
|
| toyoman25 |
02-11-2021 12:18 AM |
Quote:
Originally Posted by montijo505
(Post 3602963)
Which can did you use?
Sent from my iPhone using Tapatalk
|
Got one from Amazon, ditched the crap hose it came with and running braided hose with AN fittings. Since I work in IT have access to old PC's, I'm using a pc cover to make my bracket from a template. Need to figure what size bolts fit in to the pre-factory tapped holes on the diver's side inside fender.
|
| UrbanRunner651 |
02-11-2021 09:32 AM |
I mounted mine to the same spot as goat. Just printed a custom SLA bracket and has held up for a couple years now.
I believe the tap size is an M8x1.25, I can try to pull one later and confirm if I actually remember.
|
| montijo505 |
02-11-2021 01:01 PM |
Quote:
Originally Posted by UrbanRunner651
(Post 3603248)
I mounted mine to the same spot as goat. Just printed a custom SLA bracket and has held up for a couple years now.
I believe the tap size is an M8x1.25, I can try to pull one later and confirm if I actually remember.
|
Was going to say M8x1.25, lots of this throughout the 4th gen.
Sent from my iPhone using Tapatalk
|
| toyoman25 |
02-11-2021 03:04 PM |
will have to look in to it
|
| jacobswetsuit |
02-11-2021 10:26 PM |
Lots of useful tips in here, bookmarked this page.
|
| All times are GMT -4. The time now is 08:03 PM. |
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by
DragonByte SEO (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by
Advanced User Tagging (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
