|
Camburg UCA Play At Bolt
Took my 4runner in for inspection and the shop pulled me back to take a look at my UCA. I've been running the Camburg BJ UCA's for the past 3 years.
With the vehicle off the ground we were able to wiggle the tire side to side wherein you can visibly see the UCA throughbolt moving in the sleeve. We checked the torque and everything was snug. The mechanics things that the bolt has somehow wallowed out the sleeve and would need to be replaced. I don't think a repair with new bushings would fix this. Has anyone seen this before? |
Dont rule out them bushings, there Poly and they do open/oblong in due time. Pull the Uca see if the sleeve has too much slack on the bushing. Plus give you a chance to see if the bolt is bending also. Been there before.
|
| All times are GMT -4. The time now is 02:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by
DragonByte SEO (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by
Advanced User Tagging (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger