3rd. 4th. 5th gen. OEM Suspension Parts Blowout...
 

3rd. 4th. 5th gen. Toyota OEM Suspension Parts Blowout...

Clearing out the shop/garage all the parts pictured are nearly in perfect condition aesthetically and functionality all bushings excellent condition all ball joints still stiff no slop/play. All parts have absolutely no rust no damage.

If your stock suspension parts are tired, worn or blown out or simply crusty and rusty and seized up well here's your opportunity to freshin your s*!t up!!
and get your factory ride quality back..

Any pair of springs ...$20 plus shipping
Any pair of UCA's...$20 plus shipping
Any pair of Shocks...$20 plus shipping
Rear Panhard/Track Bar ...$20 plus shipping
Rear UCA's Pair...$20 plus shipping
Single Rear LCA ...$20 plus shipping
Pair of MudFlaps... $20 plus shipping
Rear Coil Jounce...$10 plus shipping
LC 8 Wraps... $150 plus shipping
Running Boards Pair....$20 plus shipping
Front Sway Bar ...$20 plus shipping
Rear Sway Bar...$20 plus shipping

All parts will be shipping from 92240 Palm Springs, Ca
most of these items will cost $20 bucks to ship
Average weight of springs 16 -18 pounds
shocks 16-18 pounds
sway bar about the same
ucas about the same
etc etc

So dont ask me how much to ship to your location ..you have all the information to pick your method of shipping you pick it and I'll ship it that way so you know I'm not making any extra off of shipping and fluffing the amount.

Suspension parts
 

I have a 2006 v8 4 runner sr5 and am interested in the front left/right control arms, rear lower and upper pair of control arms, and rear springs, pan hart bar, if still available.

Are these all OEM/stock parts or aftermarket too?

I (badly) need a pair of rear coils and shocks for my 3rd gen. Whatcha got?

Thanks!

Do you still have some 5th gen rear shocks?

Do you have a set of 3rd Gen front coils or strut assemblies?

Rubber jounce cone size
 

Please provide approx diameter dimension of top “ flange” of the rubber jounce. Also how tall is it?
Thanks,
Hungryhawk

Do you happen to have 4th Gen front LCAs? If so I will buy them.


Sent from my iPhone using Tapatalk

Hi there, this is an awesome collection! Do you have an rear springs for a 5th gen that would give a 1-1.5" lift?

PM Sent


Sent from my iPhone using Tapatalk

LC 8 Wraps
 

Do you still have the LC 8 wraps that would work with a 3rd gen? approx 3" of lift?

Just sent a PM about some UCAs!

I'm looking for some 3rd gen parts; uca's and suspension, front or rear. I also can not figure out how to p.m.

Looking for 3rd gen coils and shocks, if it's still available

hi i need 4 gen front springs 35471/35451 thanks frank

ISO 4th gen factory suspension takeoffs
 

I am needing two front coilovers and two rear shocks for my new to me 4th gen V8. It has the xreas deleted but I’m unsure of the age of current components and would have better piece of mind if I just installed some fresh oem takeoffs. Please lemme know how to proceed , thank you