Toyota 4Runner Forum - Largest 4Runner Forum

Toyota 4Runner Forum - Largest 4Runner Forum (https://www.toyota-4runner.org/)
-   5th gen T4Rs (https://www.toyota-4runner.org/5th-gen-t4rs/)
-   -   Dual smart usb to replace cla - pt976-03201 (https://www.toyota-4runner.org/5th-gen-t4rs/306717-dual-smart-usb-replace-cla-pt976-03201-a.html)

AZrunner11 08-08-2022 10:00 PM
Dual smart usb to replace cla - pt976-03201
 
1 Attachment(s)
I recently discovered that Toyota makes a fantastic part to add new technology to the future classic OG Trail Edition, being the OEM dual smart USB to replace the 12V cigar lighter adapter. Most importantly, I was able to confirm it is plug and play for the 2012 Toyota 4Runner which most likely indicates it will work on all years of the 5th Generation Toyota 4Runner. The most difficult decision was deciding if it should replace the front console, inside the glove box, or the rear cargo hatch.

Frasher4Runner 08-08-2022 11:27 PM
Quote:
Originally Posted by AZrunner11 (Post 3752106)
I recently discovered that Toyota makes a fantastic part to add new technology to the future classic OG Trail Edition, being the OEM dual smart USB to replace the 12V cigar lighter adapter. Most importantly, I was able to confirm it is plug and play for the 2012 Toyota 4Runner which most likely indicates it will work on all years of the 5th Generation Toyota 4Runner. The most difficult decision was deciding if it should replace the front console, inside the glove box, or the rear cargo hatch.
That's all we get? No install instructions?

<<<< 08-09-2022 08:26 AM
More Info?

emmantik 08-09-2022 10:45 AM
4 Attachment(s)
I put mine in the center console storage to replace the cig lighter port.

comtn4x4 08-09-2022 10:51 AM
Seems like it's already discussed here post#20:


Remove the 2021 4Runner Dual USB charger &amp; replace it with a normal power socket?

AZrunner11 08-09-2022 08:54 PM
That part number requires tapping into factory wires that is referenced in that link while this part number is 100% plug and play directly into the factory harness for the 12v adapter.

AZrunner11 08-09-2022 09:04 PM
1 Attachment(s)
Quote:
Originally Posted by Frasher4Runner (Post 3752124)
That's all we get? No install instructions?
Sorry no instructions yet. I merely tested that the harness would be plug and play last night in my 12 T4R by access the rear hatch cigar lighter plug.

This weekend, I will get the tool to remove the Cigar Lighter Adapter and look into adding this to the glovebox CLA or under the dash. I have added a picture to include the harness on this particular part.

stingd21 08-10-2022 03:30 PM
If this is used in the dash to replace the single USB, what happens with Carplay if you connect 2 apples devices? (2 iphones, iphone and ipad, etc)

Brandonium 08-10-2022 03:57 PM
This replaces the 12v.. Power only no data.

Quote:
Originally Posted by stingd21 (Post 3752474)
If this is used in the dash to replace the single USB, what happens with Carplay if you connect 2 apples devices? (2 iphones, iphone and ipad, etc)

AZrunner11 08-10-2022 08:24 PM
This replaces the 12v cigarette lighter adapter and not the single USB in newer 4Runners. In my 4Runner my USB linked to the radio system is in the glove compartment and I have an old school "line in" beside my 12v power supply.

fkheath 08-11-2022 10:19 AM
Quote:
Originally Posted by Frasher4Runner (Post 3752124)
That's all we get? No install instructions?
Instructions? Google is your friend: http://toyotaparts.sparkstoyota.com/...03201-4run.pdf

fkheath 08-11-2022 10:27 AM
Quote:
Originally Posted by AZrunner11 (Post 3752309)
Sorry no instructions yet. I merely tested that the harness would be plug and play last night in my 12 T4R by access the rear hatch cigar lighter plug.

This weekend, I will get the tool to remove the Cigar Lighter Adapter and look into adding this to the glovebox CLA or under the dash. I have added a picture to include the harness on this particular part.
Instructions: http://toyotaparts.sparkstoyota.com/...03201-4run.pdf

No special tool needed. Just a small screw driver.

arcotx 01-01-2024 03:52 PM
Quote:
Originally Posted by fkheath (Post 3752592)
Instructions: http://toyotaparts.sparkstoyota.com/...03201-4run.pdf

No special tool needed. Just a small screw driver.
Looking at those instructions seems like a lot of work just to pull that out. I have done a few radio installs so familiar with pulling the dash apart but seems excessive for the usb install. Is all that required for the usb install?

fourrunnerbill 01-03-2024 01:43 PM
Personally I wouldn't bother doing this. There are plenty of very low profile 12V to dual USB adapters available that do a nice job. There's always the possibility you might want the 12V socket for example a GRMS radio that needs 12V.


All times are GMT -4. The time now is 10:37 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger