FS: (4) sets of Dobinsons springs for 3rd gen 4R, Maryland
 

I'm selling 4 sets (pairs) of Dobinsons springs. All were purchased through Leonard Molina at DobinsonsDirect.
After initially installing c59-276 (front) springs & c59-137v (rear) springs, I decided to try different ones. So the 276 & 137v springs have less than 20 miles on them from rolling around the neighborhood.
I then purchased and installed c59-134 (front) springs & c59-131 (rear) springs. These have been on the truck for about 4 months.
I paired all of these springs with Dobinsons IMS59-5022 (struts) & IMS59-50225 shocks (rear).

My initial plans for the truck included quite a bit of weight (RTT, front & rear plate bumpers, etc.). For one reason or another, plans changed and I've decided to keep the truck at its normal weight. So I settled on a Dobinsons / OME combination that works for me.

Other than normal chips/scratches from installing & removing, the coils have no damage, were never used off road, and never carried more weight than normal around-town amounts from family members or errand runs. After cleaning the springs, I applied labels to each one so as not to confuse part numbers.
I am selling these at a substantial loss, as they are otherwise just taking up room in my garage.

I will not make fitment recommendations - you are welcome to discuss applications with Mike @ Exit Offroad, or Leonard Molina @ DobinsonsDirect, or David Otero @ DobinsonsDirect. Additionally, both DobinsonsDirect & Exit Offroad give extensive info on their sites.

Lengths:
c59-276 (front): 14" SOLD
c59-134 (front): 14-3/8" SOLD
c59-131 (rear): 15-1/2" SOLD
c59-137v (rear): 16-1/4" SOLD

Current prices (pair) at DobinsonsDirect:
c59-276: $245 + shipping SOLD
c59-134: $245 + shipping SOLD
c59-131: $245 + shipping SOLD
c59-137v: $245 + shipping SOLD

I am selling each set/pair for $100 + actual shipping. If you are within a reasonable driving distance of Ellicott City, MD, I will consider meeting. Payment by PayPal only.
I've owned my '01 4Runner since new, and have been an active member of YotaTech for many years as 'aowRS'.


Andreas

https://hosting.photobucket.com/imag...Render(21).jpg

https://hosting.photobucket.com/imag...Render(15).jpg

Bump for price drop!



Andreas

Highly interested in a front and rear pair, need my springs to sell and I’ll pm you.


Sent from my iPhone using Tapatalk

Taylor,
Sounds good.


Andreas

Bump.


Andreas

Two sets of front springs left.



Andreas

What struts did you have the c59-134 springs paired with? How did it perform as far as daily driving goes?

Joe,
I paired all of these springs with Dobinsons IMS 59-5022 (struts) & IMS 59-50225 shocks (rear). I would describe the ride as firm, but very controlled.

As an aside, I will post a thread soon about the IMS shocks. After coming across JZiggy's thread that mentioned having the IMS shocks re-valved by Dobinsons, I contacted them and sent the four shocks out. They came back yesterday, I reinstalled everything, and then made a 3-hour drive to the beach very early this morning. It would be an understatement to say that the ride improvement is night & day. Absolutely comfortable, controlled, and smooth.

So, sadly, I probably would have been pleased with any of these springs had I known that Dobinsons revised their valving...

I think a 'normal' pairing for a fairly-stock 4Runner is c59-134 front & c59-131 rear.



Andreas

Bump



Andreas

Bump



Andreas

pm'd ..

Sent a text. For whatever reason, my reply does not show up in the Sent folder.



Andreas