eightyhd
New member
Finally got mah lift kit installed.
3"front / 1.5 Rear (But going to 2.5 Rear because it sags)
Took me 9 hours by myself, tons of little tricks, and getting additional tools..... Lower Ball join was fun, BUT found a super EASY WAY! (Unscrew the 4 bolts.) Hydraulic jack was the key to this!
YES! I have 285-65r18 Nitto Terra Grapplers on there with 1" wheel spacers.
Super MINOR Rubbing only when turning, and can be trimmed!
Spacer: Torqued 100lbs
Wheels: 89 lbs.
Got to complete the F/R Differential drop tomorrow.:crybaby:
Pics:
Doing the Deck Plate Mod, K&N Filter and ECU Reset
Dreaming....
Stock!
Sag-a-licious
Photoshopped!
Done.
3"front / 1.5 Rear (But going to 2.5 Rear because it sags)
Took me 9 hours by myself, tons of little tricks, and getting additional tools..... Lower Ball join was fun, BUT found a super EASY WAY! (Unscrew the 4 bolts.) Hydraulic jack was the key to this!
YES! I have 285-65r18 Nitto Terra Grapplers on there with 1" wheel spacers.
Super MINOR Rubbing only when turning, and can be trimmed!
Spacer: Torqued 100lbs
Wheels: 89 lbs.
Got to complete the F/R Differential drop tomorrow.:crybaby:
Pics:
Doing the Deck Plate Mod, K&N Filter and ECU Reset
Dreaming....
Stock!
Sag-a-licious
Photoshopped!
Done.
Last edited:
