4th Gen front seat swap options?

Found some really nice custom covers on eBay, made to order the set was $200. Bought a nice foam cushion for the seat on the driver side and installed the covers over that. Couldn't be happier, looks great, feels great. I think all in I'm at $220 or so plus about an hour of my time removing the seats to install the covers. Just make sure you unplug EVERYTHING under the seat, there is still power for the seat belts and lumbar adjustment.

On my 2004 sport model, the foam and bottom seat covers were interchangeable between driver and passenger sides. Got a lightly used passenger seat and rebuilt the drivers side with the parts
 
5th Gen or Tundra swap??

I don't have any parts in front of me to check but I find it hard to imagine that Toyota wasn't lazy enough to upcycle lots of parts into the 5th gen. Might seats be one of them?? Anyone have access to a friendly neighborhood 5th gen to see what kind of connectors and size differences there are between the two. I'd gladly pay a few hundred bucks for some "new" 5th gen seats for the front of my 4th gen. An FJ Cruiser might also be a donor but some of those parts will be nearly as old as the 4th gen so finding a "premium" set of those seats will be equally hard as the 4th gen.

I just took mine for a swim this weekend and my Airbag light is now on. I wonder if the "sensor" in the seat is bad but I'm not sure the driver's side has that. I haven't had anyone in the passenger seat yet to see if it goes from off to on there on the dash.
 
Hi everyone! My driver's seat in my 06 just started making a creaking noise and the left side of the foam is collapsing a bit. I'm guessing I either broke the support springs and/or the foam is shot. Do I need any special tools to take the bottom cover off and inspect the innards?
 
Last edited:

Members online

No members online now.

Forum statistics

Threads
278,314
Messages
3,554,093
Members
248,016
Latest member
Advally Service

Trending content

Back
Top