Toyota 4Runner reliability - how does it compare?

While the 4Runner is an incredibly durable vehicle, I wouldn't suggest doing that too often unless you want to start replacing tires and suspension parts. TRD might have some upgrades for you...
 
Hahahhahahahah I feel like this thread just changed topics, but I like it! You need to start your own video thread about abusing your T4R "don't do this at home" style.
 
We've updated our reliability stats for the 4Runner to include owner experiences through June 30, 2016. Repair frequencies, in terms of repair trips per 100 cars per year (lower is better):

2008 4Runner: 23, low
2007 4Runner: 16, low
2006 4Runner: 57, low
2005 4Runner: 75, moderate
2004 4Runner: 88, moderate
2003 4Runner: 34, low, small sample size

We have two additional statistics, "Nada-odds" and "Lemon-odds", to indicate the percentage of cars with no repairs in the past year and those that required 3+ trips to the repair shop:

2007 4Runner: 89, < 1
2006 4Runner: 60, < 1
2005 4Runner: 54, 4

Additional participants always helpful, especially for years without stats or with small sample sizes.

For the repairs behind these stats, reliability information on other models, and to sign up to help improve this information:

Toyota 4Runner reliability ratings and comparisons
 
Just bought an 06 a couple months back. 125k on it. very clean. had to replace a camshaft solenoid i want to call it? it bolts right into the head pretty small cylindrical piece. the one on the left side was completely separated from the inside part which was dumping oil all over.
 
Just bought an 06 a couple months back. 125k on it. very clean. had to replace a camshaft solenoid i want to call it? it bolts right into the head pretty small cylindrical piece. the one on the left side was completely separated from the inside part which was dumping oil all over.



Camshaft Position Sensor I think... as for reliability I'm pushing 320k and all I've replaced is a wheel bearing and inner and outer tie rods. Those don't include my off-road based mods


Sent from my iPhone using Tapatalk
 
Camshaft Position Sensor I think... as for reliability I'm pushing 320k and all I've replaced is a wheel bearing and inner and outer tie rods. Those don't include my off-road based mods


Sent from my iPhone using Tapatalk



Nice! you have an 06 as well? So far i'm pretty happy with the condition of my 4Runner, transmission feels as if it shifts a little harder then i expect but this is my first automatic vehicle. i did a transmission flush, and it's a little smoother. Maybe i'm just worrying too much.
 
Nice! you have an 06 as well? So far i'm pretty happy with the condition of my 4Runner, transmission feels as if it shifts a little harder then i expect but this is my first automatic vehicle. i did a transmission flush, and it's a little smoother. Maybe i'm just worrying too much.



Yup, 06 V8.. My trans has never been flushed and it feels fine to me


Sent from my iPhone using Tapatalk
 

Members online

No members online now.

Forum statistics

Threads
278,309
Messages
3,554,068
Members
248,016
Latest member
Advally Service

Trending content

Back
Top