TRDPRORUNNER - Build
- Thread starter TRDPRORUNNER
- Start date
AgentCircus
New member
It looks like you have the Lamin-x fog light covers. Can you send me a PM or post a link of the model / item number you got, round versus oval please? Thanks!
ncboxer
New member
I had the same clunk on my 17 TRD Pro. The rear reservoir was striking the inner wheel well. In comparison to the passenger side, the drivers side reservoir was nearly flush with the body.
Trip to the dealer confirmed the clunk. They trimmed a few mm off the inner wheel well & the clunk is gone. Pic below is after the trim.
Sent from my iPhone using Tapatalk
918 T4R
New member
I had the same clunk on my 17 TRD Pro. The rear reservoir was striking the inner wheel well. In comparison to the passenger side, the drivers side reservoir was nearly flush with the body.
Trip to the dealer confirmed the clunk. They trimmed a few mm off the inner wheel well & the clunk is gone. Pic below is after the trim.
Sent from my iPhone using Tapatalk
I am going to have to look at mine.... I'm hearing a clunk too. Thanks for posting this!
stage7
New member
That is a great looking rig. I think the 275's is a good choice if you're not going 3" lift and body mount cut etc. I have a 2017 TRD Pro in cement and I'm not going to mod it. My 2010 TE is the Overlander and my Pro is my DD. Nice job!
vintage
New member
Excellent thread, hats off to TRDPRORUNNER Toyota should hire you for their next photo shoot. I just traded in my 15 black Pro on a 17 Cement Pro, but after looking at all your pics I'm starting to miss my Black Beauty. Heres a quick pic of the new one. Lift kit goes in next week along with some other accessories.
Attachments
Last edited:
aelarson
New member
What type of nerf steps are those?! Look sweet!
vintage
New member
Thanks. They are the factory Toyota Predator step bars. Came with the truck when I bought it. I like the look but probably would of put on rock sliders if given the choice.
Similar threads
