Home Menu

Site Navigation


User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-12-2009, 10:43 PM #1
CBR_GUY_IA CBR_GUY_IA is offline
Member
 
Join Date: Jul 2009
Posts: 104
CBR_GUY_IA is on a distinguished road
CBR_GUY_IA CBR_GUY_IA is offline
Member
 
Join Date: Jul 2009
Posts: 104
CBR_GUY_IA is on a distinguished road
BO019-03 10/17/2003 Wipers/Washers - Poor Rear Wiper Performance

BODY
BO019-03

October 17, 2003

Title:
REAR WIPER ARM PERFORMANCE

Models:
'03 4Runner

Introduction







The rear wiper arm hinge has been strengthened to improve performance on 2003 model year 4Runner vehicles.

Applicable Vehicles^ 2003 model year 4Runner vehicles produced BEFORE the Production Change Effective VINs shown below.








Production Change Information







Parts Information







Warranty Information

Applicable Warranty:

This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Repair Procedure

For more information, refer to the Technical Information System (TIS) 2003 4Runner Repair Manual: Wiper & Washer, Rear Wiper Motor Assembly.







1. Remove the rear wiper arm head cap by releasing the four claws.

2. Remove the retainer nut, then remove the rear wiper arm.








3. Install new rear wiper arm.

A. Clean the rear wiper pivot serration with a wire brush.

B. Ensure the rear wiper motor is in the automatic stop position.

HINT: To ensure that the rear wiper is in the automatic stop position:a) Turn the rear wiper motor switch to the ON position.
b) Turn the wiper motor switch to the OFF position.









C. Hold the slider in position "A" and install the arm and blade assembly temporarily with the retainer nut finger tight.

D. Move the slider into position "B" and tighten the nut to complete wirer arm installation.

Torque: 5.5 Nm (56 kgf.cm, 49 in..lbf)

HINT: Hold down on the wiper arm at the hinge point with firm pressure to facilitate retainer nut installation.

E. Move the rear wiper arm assembly back to position "A".

F. Check for proper operation of the rear wiper using caution not to scratch the glass.

NOTE: To prevent scratching of the glass surface, use running water or windshield washer fluid to lubricate the surface of the rear glass when operating the rear wiper.
CBR_GUY_IA is offline   Reply With QuoteReply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wiper Maintenance Thai Maintenance/Detailing 4 10-13-2006 02:07 AM
Performance Exhaust Systems Thai Engines / Suspension / Wheels / Tires / Audio / Accessories 0 02-25-2003 06:00 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 10:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020