SDRunner Build Thread

The "SDRunner"

<a href="http://s927.photobucket.com/user/jkcrawford56/media/IMG_3372_zpsw9t0lgag.jpg.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/IMG_3372_zpsw9t0lgag.jpg" border="0" alt=" photo IMG_3372_zpsw9t0lgag.jpg"/></a>
I figured after being around for a few months and dumping all my spare money and time into the truck, It was about time to start a build thread!

Currently, the "SDRunner" resides in Del Mar, California and lives a privileged life away from the snow, salt, and poor conditions of colder weather. Not the first Toyota of the family, had a 2001 Highlander, 2007 Sequoia, and a 2013 Rav4 EV. Needless to say, I'm no stranger to 'Yota's, however this is the first that has been extensively modified!

When I saw the visual refresh, I knew that I wanted a trail, and I knew that I needed the Barcelona red color. (because it is the obvious best)Bought the truck in January, 2015 right off the boat, and haven't looked back since!

a>~original

Night of pick up, thanks Toyota San Diego!

Goal of the build is a truck that will surely last awhile, through all my years in school, and tackle anything and everything I throw at it.
So, Without further adieu, Here we go!
==================================================
Modifications
==================================================

-+-Exterior-+-
Gobi Rack and Ladder
Toyota TRD Pro Wheels
Plasti Dip'd fender flares and valences
3M Vinyl Wrapped hood
General 33x12.5 r17 Grabbers
n-fab Nerf Bars
3M 20% tint all around
Raingler Net Full Gobi net
Rigid SR lighting on the Gobi

-+-Interior-+-
Icon Billet Shifter
Toyota Free Badges
Weather tech Mats
Premium Interior LED's

-+-Under the Hood-+-
Anti-Dark Hood Lighting Kit
XenonDepot 4300k phillips build HID's

-+-Suspension-+-
Icon Stage 2 (Billet)
-Ext Travel 2.5 front CO's
-Billet aluminum UCA's
-Rear 2.0 VS shocks
-2in lift springs

-+-To Do:-+-
DIY Powertank
Sliders
Rear Bumper w/ carrier
Full HID Retrofit
CB radio/handheld
Skids
Recovery gear

==================================================
Trips
==================================================

To Be Continued.....
 
Last edited:
Register to hide this ad
The first mod I did was to Plasti-Dip the bumper valences to begin the all red/black transformation.

<a href="http://s927.photobucket.com/user/jkcrawford56/media/IMG_2633_zpsurpuk1al.jpg.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/IMG_2633_zpsurpuk1al.jpg" border="0" alt="Masking photo IMG_2633_zpsurpuk1al.jpg"/></a>
Finally had it taped off, beginning to rethink this whole masking off thing:confused:
<a href="http://s927.photobucket.com/user/jkcrawford56/media/IMG_2634_zps8hgo5mrs.jpg.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/IMG_2634_zps8hgo5mrs.jpg" border="0" alt=" photo IMG_2634_zps8hgo5mrs.jpg"/></a>
After a couple coats, coming together
<a href="http://s927.photobucket.com/user/jkcrawford56/media/IMG_2642_zpsms8xadnn.jpg.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/IMG_2642_zpsms8xadnn.jpg" border="0" alt="After! photo IMG_2642_zpsms8xadnn.jpg"/></a>
Final Product

(I promise this thread won’t be all plastic dipping, just be patient lol)
 
Last edited:
After the valences, I decided to plastidip the fender flares, and a good thing I did! some ******* rubbed against me in the parking lot, but the dip actually negated the damage to my car!


<a href="http://s927.photobucket.com/user/jkcrawford56/media/IMG_2646_zpsr2ageqku.jpg.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/IMG_2646_zpsr2ageqku.jpg" border="0" alt="After a couple coats. Masking is key photo IMG_2646_zpsr2ageqku.jpg"/></a>

<a href="http://s927.photobucket.com/user/jkcrawford56/media/IMG_2680_zpsbkezu3xh.jpg.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/IMG_2680_zpsbkezu3xh.jpg" border="0" alt=" photo IMG_2680_zpsbkezu3xh.jpg"/></a>

Masked off and sprayed the fenders as well as the Toyota "T", easy job, just time consuming! Has held up okay, will most likely line-x next.

<a href="http://s927.photobucket.com/user/jkcrawford56/media/IMG_2643_zpsphd9zopd.jpg.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/IMG_2643_zpsphd9zopd.jpg" border="0" alt="Unmasked! photo IMG_2643_zpsphd9zopd.jpg"/></a>

<a href="http://s927.photobucket.com/user/jkcrawford56/media/IMG_2650_zpspv0wldw6.jpg.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/IMG_2650_zpspv0wldw6.jpg" border="0" alt=" photo IMG_2650_zpspv0wldw6.jpg"/></a>
(Ignore the wetsuit in the passenger seat)

Also added TRD Rims at this point, as well as n-fab nerf bars in preparation for being able to get into the car after a lift
<a href="http://s927.photobucket.com/user/jkcrawford56/media/IMG_2696_zps78dxsb5x.jpg.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/IMG_2696_zps78dxsb5x.jpg" border="0" alt=" photo IMG_2696_zps78dxsb5x.jpg"/></a>
 
Last edited:
The GOBI!!!
After the wheels and n-fabs got put on, it was time for one of those coveted Gobi Racks! Hopped into [MENTION=119516]jicko[/MENTION] 's group buy, and scored a sweet deal on rack and ladder. Install went relatively smoothly, other than the whole replacing gas struts solo, that was a toughie. Overall, this thing is great! Doesn't flex at all, even with above the static load limit on it.

<a href="http://s927.photobucket.com/user/jkcrawford56/media/IMG_3154_zpslbokfdt9.jpg.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/IMG_3154_zpslbokfdt9.jpg" border="0" alt=" photo IMG_3154_zpslbokfdt9.jpg"/></a>

And the rear...
<a href="http://s927.photobucket.com/user/jkcrawford56/media/Screen%20Shot%202015-08-13%20at%2012.28.43%20PM_zpszgyhjvdk.png.html" target="_blank"><img src="http://i927.photobucket.com/albums/ad119/jkcrawford56/Screen%20Shot%202015-08-13%20at%2012.28.43%20PM_zpszgyhjvdk.png" border="0" alt=" photo Screen Shot 2015-08-13 at 12.28.43 PM_zpszgyhjvdk.png"/></a>

By this time I already have my Icon Stage 2 installed (hence the decal) but could not find any before/after shots of the rake)
 
Last edited:
Considering how much $$ you've put into it I'm surprised all you've posted so far is plasti dip lol
 
Plasti-Dip the world! Hey, just got the same color and planning to do the same thing to the silver bits--what color did you use? Want to see the rest of this, for sure.
 

Forum statistics

Threads
278,495
Messages
3,551,646
Members
248,196
Latest member
AndiGarage

Trending content

Back
Top