I want to run the OEM LED low/halogen high beam housings in my wife's 2020 ORP. I read a ton of the threads on this forum and some of it is confusing. I have no desire to get the OEM LED low/high beam setup as we rarely run the high beams and honestly find the halogen lighting on the high beams to be plenty strong.

I just want to make sure I understand things correctly before ordering parts. Based on my research, I need to order and complete the following to do the conversion:

LED w/ Halogen High beam
Left: part# 81070-35600
Right: part# 81140-35610

I can then unpin the low beam connectors from the old housings and install install onto the new housing and that's it to complete the conversion.

If I don't want to unpin the wires and swap connecters, I can buy the "No shutter" harness here: 4Runner 2014 - 2020 OEM bi-LED Headlight Conversion Harness | FBC Harness Solutions

Thanks for the help.

I just looked up everything, from the original post and it looks like you are good to go with your parts!

I don't know if the part numbers are correct but I did this exact install on my '19 TRD ORP. I got a set of used headlights from a '21 T4R off of ebay. I did the unpin deal as there was no harness available at that time. No problems at all and they work & look great.

In case you aren't already I'd suggest swapping out the fog lights with an OEM LED set to match. They are a direct swap as the connector is the same and will be easy to install since you'll already have the bumper off to install the headlights.

Second that. There is a guy on Ebay selling those. His price is now down to $35 each: https://www.ebay.com/itm/234936589516

Thank you!

Thanks. And yep, we installed the Pro LED fog lights when we did the Pro grill, front and rear scuff plates, etc.