[Yota_Noob]

Originally Posted by joshp767

I still have a couple of the aluminum transmission plates above, but wanted to add a few more things to the list...... For the sake of keeping it simple, all of these are going to be a flat 25% off the prices on our website. I am not posting any pictures because the "defects" are all very straightforward and unsubstantial.

* 03-09 Black Aluminum Front Skid - No defect, has "old" logo.

* 10+ Black Aluminum KDSS Front Skid - 3/4" less ground clearance than the newer version.

* 10+ Bare Steel Front Skid - Front two holes were miscut about an inch to the side. Has holes drilled at the correct locations now and is ready to mount.

*03-09 V6 ONLY Bare Aluminum T-case plate - older style "aka doesn't have the 45 degree flange at the back of the skid plate" - Includes new, non-blem powdercoated cross-member.

*03-09 V8/ 10+ 4Runner - Black Aluminum T-case plate - older style "aka doesn't have the 45 degree flange at the back of the skid plate" - Includes new, non-blem powdercoated steel cross-member.

I'll take the 03-09 black aluminum front skid

[RCI Offroad]

Originally Posted by Yota_Noob

I'll take the 03-09 black aluminum front skid

Sounds good, give us a call at 970-222-9195 and we will get that shipped out as soon as we get your info!

[MattJakobs]

Any plans for 3rd gen stuff?

[themuffinman619]

Subbed

[meRockboost]

Yeah drop something for the 3rd genners lol. I need sliders and skids but I just broke the bank and the wife with what I put in my sig

[Yota_Noob]

Received my skids today, only took 4 days from Colorado to my doorstep on the east coast. Great looking skids too! Loving the black powder coat finish. Thanks again @joshp767

[slotoyo]

why doi find these thread too late. i need a set of skids!!!

[wnelax04sr5]

Originally Posted by joshp767

I still have a couple of the aluminum transmission plates above, but wanted to add a few more things to the list...... For the sake of keeping it simple, all of these are going to be a flat 25% off the prices on our website. I am not posting any pictures because the "defects" are all very straightforward and unsubstantial.

* 03-09 Black Aluminum Front Skid - No defect, has "old" logo.

* 10+ Black Aluminum KDSS Front Skid - 3/4" less ground clearance than the newer version.

* 10+ Bare Steel Front Skid - Front two holes were miscut about an inch to the side. Has holes drilled at the correct locations now and is ready to mount.

*03-09 V6 ONLY Bare Aluminum T-case plate - older style "aka doesn't have the 45 degree flange at the back of the skid plate" - Includes new, non-blem powdercoated cross-member.

*03-09 V8/ 10+ 4Runner - Black Aluminum T-case plate - older style "aka doesn't have the 45 degree flange at the back of the skid plate" - Includes new, non-blem powdercoated steel cross-member.

do you still have this?

[Erkelbot]

Originally Posted by joshp767

Here is a pic of those plates and also of the "repair" which is just a second notch that was added to each plate.

I might be interested in a blem front skid for the '08. How much shipped to 55439? Powdercoated is best. Old logo AOK.

[yotantexas]

Originally Posted by joshp767

I still have a couple of the aluminum transmission plates above, but wanted to add a few more things to the list...... For the sake of keeping it simple, all of these are going to be a flat 25% off the prices on our website. I am not posting any pictures because the "defects" are all very straightforward and unsubstantial.

* 03-09 Black Aluminum Front Skid - No defect, has "old" logo.

* 10+ Black Aluminum KDSS Front Skid - 3/4" less ground clearance than the newer version.

* 10+ Bare Steel Front Skid - Front two holes were miscut about an inch to the side. Has holes drilled at the correct locations now and is ready to mount.

*03-09 V6 ONLY Bare Aluminum T-case plate - older style "aka doesn't have the 45 degree flange at the back of the skid plate" - Includes new, non-blem powdercoated cross-member.

*03-09 V8/ 10+ 4Runner - Black Aluminum T-case plate - older style "aka doesn't have the 45 degree flange at the back of the skid plate" - Includes new, non-blem powdercoated steel cross-member.

I would like to get a shipping quote on this item to 76017. Send me a PM with the amount.

[etc.]

subscribed.

[Beef312]

PM'd about the 10+ aluminum skid. Depending upon the shipping quote and question, more than likely I'll take it.

[BigCSS]

I also pm'd about the 2010+ kdss aluminum skid a couple of days ago.

[Krayziekid]

Subbed. Love stuff at a discount.

[boyfester]

Thanks Josh! Just ordered a blemished aluminum engine skid plate for $175 for my '14 TE and he threw in a $50 filler plate with free powder coating. You rock!