Cut off of the Morimoto XB lights. Used a blanket to cover the low beams while aligning the Morimoto fog lights.

Cut off of the Morimoto XB lights. Used a blanket to cover the low beams while aligning the Morimoto fog lights.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
The Morimoto pins had to be widen a tad bit.

The Morimoto pins had to be widen a tad bit.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
Once you test the polarity and confirm it works, attach the connector.

Once you test the polarity and confirm it works, attach the connector.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
Testing the polarity before attaching the connector to the Morimoto fog lights.

Testing the polarity before attaching the connector to the Morimoto fog lights.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
Make sure the alignment screw is snapped back into place.

Make sure the alignment screw is snapped back into place.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
Pushing back and securing the alignment screw when attaching old mounting bracket to the Morimoto fog lights.

Pushing back and securing the alignment screw when attaching old mounting bracket to the Morimoto fog lights.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
After placing the OEM mounting bracket, place back the plastic screw that used for the alignment of the fog lights.

After placing the OEM mounting bracket, place back the plastic screw that used for the alignment of the fog lights.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
OEM fog light mount removed/separated from light fixture.

OEM fog light mount removed/separated from light fixture.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
OEM fog fixture without its mount.

OEM fog fixture without its mount.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
To remedy the large gap between the Morimoto fog light lens and the housing that it sits in, I decided to swap out the mounts. Top is OEM and bottom i

To remedy the large gap between the Morimoto fog light lens and the housing that it sits in, I decided to swap out the mounts. Top is OEM and bottom i

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
Morimoto installed into position. Notice the large gap between the lens and the housing on the bumper.

Morimoto installed into position. Notice the large gap between the lens and the housing on the bumper.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
Left is OEM fogs and on the right is the Morimoto XB fog lights.

Left is OEM fogs and on the right is the Morimoto XB fog lights.

  • Media owner SidKo
  • Date added Nov 30, 2018
  • Reaction score 0
  • Comments 0
SidKo

Morimoto XB Fog Light Install

  • Items 12
  • Album owner SidKo
  • Date created
There are no comments to display.

Album information

Album owner
SidKo
Date created
Item count
12
View count
0
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

SidKo

SidKo

Media items
81
Albums
4
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Members online

Total: 3,703 (members: 1, guests: 3,702)

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Share this page

Back
Top