Recent content by 4RunnerSean

Hello- 1992 4Runner 3VZE Looking to replace the wire harness from the ECM through the engine bay; has the diagnostic port, runs to the injectors, distributor, knock sensor, and then terminates at the back of the intake manifold. I have been unable to find a new OEM or aftermarket harness...

I have a 1992. I did a bunch of research on re-core, plastic & aluminum, but eventually purchased an all aluminum. Here is what I purchased (assuming you have the V6): Champion Cooling Systems CC50: All-Aluminum Radiator 1988-1995 Toyota Truck & 4Runner | JEGS

Im trying not to do that, but I may need to ultimately do that. I might at least wire from the tweaters that are working to the speakers in the panels. I really dont want to run new cable from the front of the truck to the rear. Thanks for the advice.

Hello, Ive been searching threads and YouTube for anyone with this issue. My 4Runner came stock with the CD/Tape/Radio combo. Double din radio. When I pulled the stock unit, I found the radio ran to an external, stock, Toyota amplifier. I also noticed the wiring harness I purchased seemed to...

Reference Sources Here are a couple good links. 1st is from someone who posted about their 3VZE to 5VZ-FE. 2nd link it so a place out of Washington that will sell rebuilt engines/kits. 4x4Wire - Toyota 3.0 to 3.4 (3VZ-FE to 5VZ-FE) Engine Conversion Rebuilt Toyota Engines - Toyota 3.4L...

Rack towers, cross bars, and Basket Do you have any links to those items?

Fixed I figured it out. Went through the wiring diagram to find all the connections to the front switch. Based on the wiring diagram, the only thing that should have been causing the window to NOT roll down was the window lock switch. Pulled the console to check the wiring, and found that I...

It’s not the wiper sensor. I ruled that out. I doubt its the door sensor. If that was the case, I believe the “BACK DOOR” light would be illuminated. There could be something wrong with the key switch. I cant actually get the key in the rear door lock cylinder. It’s possible that is maybe...

At this point I am stumped. Here is the troubleshooting I have done thus far: 1. I have confirmed the rear window motor works by putting power directly to the window motor from a power source. 2. The rear window and wiper motor relay has been replaced (the new one could be broken, but I doubt...

Sorry if there us already a thead with these instructions, and feel free to post a reply with a link to an existing thread. I am looking to replace the existing power antenna with a whip/stub antenna. What parts do I need to get, and does anyone have instructions on making the switch? Thanks...

Everything RonJR said. Check your valve covers for signs of oil leaking. You may need to replace the valve cover gaskets. Some small thing to consider replacing once you’ve done the engine and suspension maintenance/replacements: 1. Window motors and assemblies if you have power windows 2...

Idler Arm I need to replace my idler arm. Replacement parts vary in price from $30-$300. I figure the $30 replacement part is too cheap, and I am not paying $300 for the Toyota OEM part. Any suggestions?

Ill totally be getting one of these.

Shocks and Spring @O.A.B.K Where did you get your KYB shocks, and was your a 2" lift, or stock height? I'm looking to do a 2" lift to support the OEM 17" TRD Pro wheels.

This is an awesome setup.