Recent content by 4running4

My thoughts also, something just wasn’t right with it. It ran fine when I test drove it but it was dark and I really couldn’t go over it properly...I passed.

Excellent info , thanks.

I did a quick search of 2000 4runner and found another with the hood scoop...not a factory option on the 3.4 ?

Link to ? Since I won’t be buying it here is the link you were asking about? Toyota 4Runner 4X4 Limited 2000 Low miles CARFAX - cars & trucks - by owner - vehicle automotive sale

I was kinda thinking the same thing, I also noticed the pistol grip shifter and more simulated wood grain than I’ve seen before. It also has a drop down DVD screen from the roof in the back seat.

Looking to buy this but I have never seen one set up like this, the seats and hood ? I figured someone here would know or have an opinion. Thanks 2000 4X4 3.4 V6

I went ahead and took the struts over to a friends shop and used his professional spring compressor and knocked em out. The only issue was getting the bottom bolts back in due to the extended length of the bilsteins compared to the stockers. I put a small bottle jack between the control arm an...

What type of spring compressor are y’all useing for the front shock replacement?

Just did the rears on my son in laws 2002 2WD. I used a small size sawsall to cut the rubber and into the shaft, worked great. I used a off set rachet 17mm open end wrench and an Allen wrench to tighten the top, and yes a pain in the arse. Thanks to original poster for this thread.

Thanks y’all!

That would be a console shift 3.4, 2WD

Talking about the plastic piece that says P RND etc...dealer item I’m guessing? Thanks

I did a search but I could not find anything. Just wanted a diagram of the firing order. I think the previous owner may have messed up the wires. Doing a major tune up along with timing belt and all the associated stuff. Thanks!

So how’d it work? Seafoam do the trick?

Thanks for the link! So my understanding is the A/F sensor is only a calif thing. It does not show an A/f sensor application for anything but calif. models. So that means I have two O2 sensors, 1upstream of the cat and 1 down stream, yes? Just don’t want to order the wrong stuff.