Recent content by 4wordSOUL

I've been wanting to wrap my hood to cut down on glare for a while now. I found this company that makes them SCS Wraps, even have the color combo I am looking for. However, it's made for a scoopless hood. Anyone know of a place that makes these for 4th gen Sport hoods covering the whole thing...

I had a steel bumper installed a few years ago and I think they cut/disabled the DRL wiring in the process. How can I test that it is in tact and if it's not can I find a replacement wiring harness I can install successfully?

Weight? Hey Mike, looking to get a 3" Dobinsons setup. I'd like to retain a decent ride but still not lose the lift when I go camping and load up. I get that static vs. dynamic weight can be tricky in determining coil rate, but I figure you have the experience to sort this out. How do I weigh...

FYI 8mm bolts didn't fit my rotors so I'm going back for 6mmX1.25 coarse bolts and I'll followup with what I find. Anyone have an idea why the 8mm didn't fit?

This is the thread you need to follow with the correct info. 4th Gen 4Runner Rear Brake Rotor and Pad DIY Tools: 17mm socket Small flat head screwdriver 2 8mmx1.25 bolts (for rusted/frozen rotor removal) hammer torque wrench floor jack 2x jack stands brake...

This is the thread you need to follow with the correct info. 4th Gen 4Runner Rear Brake Rotor and Pad DIY Tools: 17mm socket Small flat head screwdriver 2 8mmx1.25 bolts (for rusted/frozen rotor removal) hammer torque wrench floor jack 2x jack stands brake...

Ok ok, blinding idiots behind may not be the most forgiving attitude we can have on the road. I finally was able to install the LPR last night and it's great for it's intended purpose. I agree, further escalating bad behavior on the road isn't good for anyone, I will not be installing a...

Many aftermarket suspension vendors come up with clever terms like BOSS or ULTIMATE indicating the 'measurable' amount of performance their obfuscated marketing-speak tells you about what to expect from their products. Free your mind with Science and don't toy around with thoughts & prayers...

Science I considered something similar a few years ago but never got around to it, I like that the LPR is more subtle and not super aggressive for all the reasons mentioned (it's hard enough swinging the dick around am I right aemravan). This is much cleaner and easy to maintain. The light...

Still mixing in the beaker... Obviously this little plate light won't compete with light bars but it will dissuade the tailgaters at the proper height & distance to truly appriciate the color temp and consider a better 'racing' line. If I wanted to compete with the light bar bros I'd install a...

The idiots at the carwash ripped them out without telling me (imagine that) and I can't seem to find the correct description so I can order replacements. Anyone know what they are actually called?

As we all know 'safety first' so I'm installing this LPR & I'd like to make sure everyone maintains that 1 second per 10 miles an hour behind me. I'll need to wire it to my reverse light as well as a switch. I understand I want to put in a relay on the switch to isolate it from the reverse light...

No luck in finding a solution - had to return them, thanks for the help anyway.

Hoping one of us can help me figure this out. I picked up VLEDS V6 Triton WHITE AMBER SWITCHBACK front turn signal bulbs to replace the incandeceent bulb that works with the Shrockworks housing they provide in my front bumper. I thought maybe I could 3D print a scan of the parts and come up...

Science not marketing bu11sh*t Many aftermarket suspension vendors come up with clever terms like BOSS or ULTIMATE indicating the 'measurable' amount of performance their obfuscated marketing-speak tells you about what to expect from their products. Free your mind with Science and don't toy...