Recent content by 97SR5T4R

question: when i was testing the 4WD switch i noticed what looked to be a drain/fill plug next to the 4Lo switch on the TC. Is there supposed to be anything there like a sensor or switch. I ask because it seems odd to me.

Just tested the 4WD indicator switch on the TC and its working properly. I looked for the ADD relay and didn't find it, i dont think i have one. when i shift into 4Lo i here clicking coming from the 4WD computer not from a relay. The connections all in good condition to. I dont know where to...

thanks TheDurk i really appreciate your help, i couldn't have figured it out by my self.

yes the switch is happening when i shift into 4Lo but not for 4Hi

sorry, so when im in 4Hi there is no vacuum going to the diff but the VSV's are receiving vacuum from the intake manifold. When i shift into 4Lo the blue VSV sends vacuum down to the diff engaging the hubs but not for 4Hi. Im guessing that the blue VSV engages the hubs and the Redish brown one...

ok so both VSV's are getting vacuum but only one is sending vacuum down to the diff, i replaced the VSV's and still the same problem any idea's on where to look next. the relay still only clicks for 4Lo and the VSV's send vacuum when i engage 4Lo but not for 4Hi. This sounds like an electrical...

85 views and no replies, come on guys someone has got to know how to do this.

thanks TheDurk, ill check that tomorrow sometime and see if i can figure out what the exact problem is

I just bought a rear air deflector for my 97 runner and was wondering how to install it. my runner never came with one, so any help is greatly appreciated.

well i think it has to do with the ADD system now since i just tried to turn the front drive line when i put the shifter into 4HI and it didn't turn. Now im confused, is there a different vacuum system for each position ie; 2HI, 4HI, and 4LO ?

:ybrick:I've searched 3 different forums and can't find one with an answer to my problem. 4Lo engages fine but 4Hi wont engage at all. I hear a relay clicking when i shift into 4Lo but not for 4Hi and the 4WD light doesn't come on for either position. I just replaced the 4WD indicator switch...

Hi im new to 4runners, i just traded my taco for my 97 SR5 4runner w/ 5-speed and V6. The problem is 4Lo engages fine but 4Hi wont engage at all. I hear the relay clicking but the 4x4 light doesn't come on for either position. Can some please help, thanks