Recent content by 99SC4Runner

I have a set of 01 heated mirrors that I want to add to my 97 SR5. I just need to figure out which colored wires do which function, and to add the wires from the heated mirror pins to the defrost wires going to the rear window. Has anyone else here done this mod to their 96-98 SR5 4Runner yet?

I'm still liking them. The Can Bus adapter works and it was basically a plug and play upgrade.

I just ordered one of these rear spoilers in Black for my 97 SR5 that never had one on it from the factory. I can't wait to have the rear window to remain cleaner more often.

Yes, I like them A LOT! They are really bright with great beam pattern. I don't get flashed from oncoming traffic either.

I got a set of LED headlight bulbs for my 97 4Runner from our forum sponsor Auxito - AUXITO(R) Car LED Lights | LED Forward, Interior & Exterior Lighting The headlight bulbs were packaged great and look to be made from high quality materials. Installation was simple and straightforward. I...

rickashay - Any update as to when the prototype kits will be ready? I do my own welding and have built a Move bumper for a 2010 Dodge Ram 1500 lifted Crew Cab 4x4 pickup I had. I can certainly provide info on the welding of your awesome looking bumper kit. I'd be super interested in the UB3R...

I unplugged the battery ground first. This is how I got it out; After removing the glove box, dash brace, glove box cover, etc. Have to loosen the passenger side of the dash and pull it out just a little bit. The reach under the dash cover for the airbag, rotate the airbag clockwise to make...

I searched the 3rd gen forum here and googled it, but nothing came up for changing out the passenger side dash air bag. Can I change it without removing the dash? I've already replaced the steering wheel airbag and controller and now just need to know the process to change the dash airbag on...

I don't think I'd take it back to that shop since it seems as they don't know how to correctly troubleshoot/diagnose issues. Do you have some place out of the weather to jack the rig up off the ground and start checking out the drivetrain? Are the driveshaft yokes timed correctly with each...

A minimum of 3, maybe 6 total. ARB compressor, LED light bar, fog lights, etc. I already installed a 02 center console with cupholders, so I already moved my security and rear window switches from the 97 center console to the switch locations to the left of my steering column.

I'm thinking of swapping out my single din Sony HU with a Pioneer AVH-2300NEX double din HU that I have. I want to be able to install a rocker switch panel to use for my ARB air compressor, off-road lights, fog lights, etc. I do have a brand new rocker switch panel that goes where the storage...

I could hear the blend door make contact in the HVAC box, so I decided it was most likely the heater core was plugged. I decided to flush the heater core to see how dirty it was. I flushed it in both directions 3 times until it was only clean water coming out of it. Then I took my air blow...

I just got this 4Runner and I just replaced the radiator and thermostat with brand new ones. I have 182° at the upper radiator hose and around 160° at the lower radiator hose. My heater valve is working correctly and with my infrared thermometer, when the engine fully warmed up and heater...

It seems like any aftermarket replacement for OEM seems to be just junk nowadays. I think I'm going to look at changing out the bulb shield from my OEM Toyota headlights that are junk anyway, and swap them into the new headlights and see how the light pattern/beam display on them. If that...

I've thought about this aspect of it as I have a set of new Morimoto Bi-xenon HID projectors, shrouds, etc.