Recent content by airbur

Howdy Everyone. I pulled the roof console/box ass. to install a radio. When I was finally able to pull it out of the roof crossmember, the mounting clips fell off into the frame. I was able to fish them out with a magnet but for the life of me I cannot figure out how to re-install them. I'm...

You're right..it's power steering. Not one on your screenshot though...I found it....

I've searched the parts diagrams and come up with nothing. It's metal, rusted, and leaking coolant. Directly in front of the radiator, behind bumper. Curved up at both ends where it connects to hoses. Any ideas on a part number? 2003 4Runner Sport V8. These pics are looking from the...

Nope...you can only toggle something off that has a process to be turned on. There is no process shown to turn it on in the first place.

Actually, no. I don't want anything to happen with shift lever position or ignition key position.

Thanks for the idea. I also thought of that and checked the functionality of the cabin light turning on and off with the door and that seems to work fine. I'm sure it couldn't hurt to replace the sensor.

I searched but couldn't find this exact issue. 2003 V8 Sport....when the ignition key is turned from ON to ACC (door remains closed) all the doors unlock. I've reviewed the instructions in the manual multiple times and this isn't even a function it mentions...let alone how to program/cancel...

Resolved! Took the axle up to CVG Axles in Denver and they corrected the threads. Size is M28x1.5. Worked perfectly and the OEM nuts fit again.

Considering the new OEM nut fits on an aftermarket axle that we're replacing, I can only assume the threads on the OEM axle have been damaged.

Howdy. I have an OEM 2004 Toyota 4Runner v8 front axle that I just rebooted. It was in storage so I don't have the original nut. I bought new OEM axle nuts (from Toyota) and they do not fit. Were different sizes of nuts used? I also have an aftermarket axle and the OEM nuts fit it perfectly...

This was it. It’s a PAC RP4.2-TY11. We ran the reset process in its manual and all 10 speakers are working now.

So the replacement amp is doing the exact same thing. Probably need to pull the head unit and check connections next.

I did all that with my 2004 many years ago. That is not an option at this time for this 2003.

2003 Sport V8 with JBL Synthesis coupled to KENWOOD head unit. Everything was working fine then all of a sudden I only get sound out of the driver’s side tweeter and sub. I checked all the config settings. Since I’m still getting sound out of 2 speakers I think it’s mostly likely the factory...

Looking for the OEM latch that you lift up on in the grill when opening the hood. Thanks.