Recent content by aqua33

I am selling 5 17" stock 5 spoke 7.5" wide wheels off of my 2003 4th gen. These will fit any Toyota with a 6 x 5.5 bolt pattern. The wheels have 55k on them with Michelin Cross Terrains 265/65/17's. The tires are my second set and they roughly 30k or less on them. There is plenty of tread left...

I am looking for a set of 4 FJ Cruiser 07-09 17" wheels. I understand they sit about 3/4" to 1 inch out from the stock 17" 4Runner wheels. I am putting 285/70/17's on my 4Runner and with my stock wheel the tires will be nearly rubbing the upper A-arm. If anyone knows someone who has a set to...

I installed a Readylift 3/2 6 weeks ago and am I very happy with the results. Minus the CV boot issues I had the kit works very well. The rig looks good but I read that the FJ cruiser front coils when installed on the 4th gen gives 3/4" lift. I would like to install the FJ coils along with the...

Loctite Actually now that you mention it there was no sign of any thread lock on the factory bolts. They came off rather easily. The new bolts from ReadyLift come with the plastic/wax nuts are hold very well.

Kmvreter, Thanks for the diagram it was a big help. Where did you find the diagrams? I installed the differential 1" drop kit last night and torqued them to 101+ ft/lbs. Thanks again.

Thanks for everyone's input Last night I installed a 1" front differential drop kit from ReadyLift. The way the differential is hung from the cross member only gives about a 3/4" drop. After the install the drive shaft angles were improved but not to the oem angles. I will run it for a few days...

Torque So is that PDF telling me the torque spec for the two bolts is 101 ft/lbs??

Does anyone have the torque specs for the 2 differential 19mm bolts that connect to the front cross memeber??? Thanks.

I know a lot of you have lifted your 4th gen runners with either a 2 or 3 inch front lift. I installed a Readylift 3" front 2" rear and within a day the passenger side inner boot (on the small side of shaft) failed. I had the clamp replaced and it last a day or two and then I noticed the driver...

I installed a ReadyLift SST 3" front 2" rear and the kit came with 1" diff drop spacers. My question is do I really need to install the diff drop spacers? I went from 8" of center point clearence to 11" and if I add the diff drop I would only have 10" of clearence. The CV joints do not appear to...