Recent content by AZrunr

Thanks for the response...I'll have to try that this weekend... Any other advise is still welcomed! :cowboy: AZrunr

I have a 98' 4wd 4Runner with a Sonoran Steel 1.2 left installed. I have a squeak/grinding noise while turning at slower speeds. It also does this when traveling over bumps that affect one tire/side at a time. Parked I can push above the front wheel well and duplicate the squeak and it seems...

I have a 98' 4WD 4Runner with ABS. I am living in Alaska where it gets to -60 in the winter, and up to 90 degrees in the summer. I am looking for the best performing brake fluid for the extremes I live in. Thanks in advance... AZrunr

The only rubbing I get are at certain turning degrees while stuffing a tire. The front is the only rubbing, and even then, it isn't much. I still plan on getting a Roger Brown body lift, partially to fix this little rubbing, but also to get ready for 315's. I have been busy, so I will try and...

I have installed a 3" Revtek lift on my 98' 4Runner and have noticed that if looking straight on, there is a slight angle to the body in relation to the ground and suspension. I have read up on it and have concluded it is probably the panhard bar pulling the one side, but am looking to see if...

I am a proud Runner owner here in Alaska. Good to know someone else having some pride in their 4Runner...

I found what I was after...obviously no one else knew where to find, or what I was talking about, but here is the info. I found in case anyone else plans on doing this. The link is... http://www.top4runners.com/ja/additions1.html or here are the part numbers, they are Toyota parts... Drivers...

I need the part numbers for these. I didn't put that in the original post, sorry guys. I believe they may come from a 2000 or so tacoma trd. I'm actively looking. Thanks again...

I am wanting to take the running boards off of my runr and need to get the part number of the end caps for the back/bottom of the front flare, and the front/bottom of the back flare. If I just take the running boards off they will have a very unfinished look. The caps I speak of will finish...

Thanks for the help all...now I just have to combat the ups and downs of my tire pressure when the temp. changes so drastically right now. I've been running them at 30 psi, but I will run them at 35 now...thanks again...:D

I have the 3" Revtek lift and run 285/75/16's underneath. The only times I ever have any rub problems while driving is when a wheel gets completely stuffed. I plan on doing a 1" body lift that will hopefully help with that. As far as the spare, I keep it lashed in the back cargo area. The...

I am wondering what is the best psi to run these tires at. I'm not really possitive and would like some sage like advice on the matter...thanks to any input:)

I didn't know the config. as far as blowers for it. From what you said I'm guessing there is one for the winshield/upper vents, and one for your feet area. Maybe not, like I said I am just getting a lot of draft from the passenger side and this has only been within the last month. It has been...

Yeah, that mythical stuff that floats from the sky,...I'm taking the runner and my snowmobile and playing in it tomarrow. We have about 4 feet of that "stuff only in stories". I am from AZ and know the flip though, enjoying while I can here, and back to sunny AZ...oh, I haven't seen it above...

My passenger side fan for blowing heat/AC is shot and I need to know how to change it. The driver's side works great, but the passenger side gets really cold drafts when driving, and I can't hear the fan going on that side...thanks for any help...