Recent content by BHarv

k3v11n, sorry about the super long delay in getting back with you on your question. The spindles are holding up fine to date. They play well with the Icon coilovers and hold an alignment just fine. No weird wear on the tires or anything like that after 10k + miles. Over all I'm impressed with...

I would go ahead and get the extended lines if you are going with anywhere over 3"+ like I was. If you go with Maxtrac spindles they come with the front extended SS lines. I went with this brake like kit from Slee Offroad (P/N STF1017). For $140 it's worth it. Slee - Drivetrain - Brake Parts

Front Maxtrac Spindles Icon 2.5 Reservoirs (factory ride height) Icon UCA's SS Brake Lines Rear Icon 2.0 Reservoirs (custom length) Icon 3" Overland Springs SS Brake Lines Extended Swaybar End Links 295/70R18 Nittos. Some trimming required at the front bumper but I could have probably tweaked...

Makes sense about the VSC. Ill read up on that thread and see if that could be the source. Tires are brand new so I can eliminate that one. Thanks for the suggestions guys. Ill get back when I try that and let ya know if that worked.

Ok, so I got my lift sorted out and everything rides great. Now I'm having an issue with the traction control activating while turning sharp and somewhat fast. I can feel the outside wheel braking (sometimes the audible beep occurs - not always) when taking a 90 deg turn at a spirited level of...

Thanks man. I haven't seen an XS-P lifted yet but there has to be a handful out there. I sold my gray SR5 to get the white XS-P with less mileage because I knew I'd be keeping it a while and putting a TON of $$ into it. I took a look at yours and a couple of the other guys that are running...

Thanks Gents!

That's just how those JBL 3.5's are. Again, the only modifications were to the bracket really. I had to basically hack off the tack welded nuts that held the bolts into the bracket. The holes where too close together. Also, I had to bore out the holes on the actual speaker itself. Nothing a...

Don't have any of the head unit but I can grab one. Install was simple. Mine came with the adapters attached from a 2015 FRS and they plugged right in. I need to pull it back out to install the Bluetooth mic so I can get some then. I used the same adapters you see everyone else using in the...

Well after a long time collecting parts and selling my old gray 2006 4Runner I got the suspension and a couple other things dialed in for the most part. Build List Suspension: (Front) Maxtrac Chinese Knock Off Spindles (don't ask me why I went with these) Icon 2.5 Remote Reservoirs (Extended...

I didn't exactly follow the directions (because there weren't any) when I was routing the brake lines but they work fine at full lock.

Not exactly sure about that measurement off the top of my head but I'll try and get something after work today. I recommend the spindles but the front extended SS brake lines that came with the knockoff pair I got didn't fit. Good thing I had a full set of +4" front and back from Slee Offroad...

Thanks man... Yeah we figured it out with a little help with the diagnostics. It was late and I'm dumb.

Sooo how do I rotate those pics??? Also pic of the panhard clearance to the exhaust. Not good.

Well it turned out. 295/70R18 - Method Roost -12 offset. Only issues. The rear Borla dual exhaust pipe going to the drivers side is a little too close to the panhard for my liking but it rides without hitting it so far. Also, had to use the Snap-On diagnostics tool to get any brake fluid at...