Recent content by Bocomo

Maria, I have a 2001 4runner (3rd gen 4runner) and it is pretty straight forward, though a little tedious with large hands. Pull of rubber cover, unscrew spring(bracket), pull bulb out and replace. Your owners manual should provide you with the procedure for your 2005 4runner. I recommend...

Are you asking me?

I got dynamat at circuit for cheap, even though they list it for 99$ on their website. I got for under 50. Dynamat X door panels.

the sequence is depress foot brake engage parking brake release parking brake engage parking brake release foot brake or 1. pedal brake. constant + 12volts on. 2. ebrake. chassis ground grounded. 3. ebrake. chassis ground ungrounded. 4. ebrake. chassis ground grounded. 5. pedal brake...

There are two ways to doing it. I simply left the wire to the foot brake on. Meaning I still use the foot brake in the sequence. But you could place a switch in there too.(the wire going into the switch would need to be from a low amp power source instead of the foot brake wire) With the wire...

I just rig up a switch myself. It was simple and cost 4$.

Anyone know how to rig video bypass on alpine w205. I know I can buy a bypass on ebay but was wondering if anyone knew how to rig one up.

Did you disconnect the battery? Sometime the computer needs reset after replacing spark plugs and what not.

What do the owners of these vehicles look like? Got any interior pics? Navigation and/or Stereo?

Here is what I reccomend Narva Rangepower+50 ultra high efficacy bulb. Gives the maximum street-legal beam performance and best beam focus for longest and widest seeing distance. (no coatings, just strainght light) Fog lamps: Tungsram H3 Gold Optimizes the performance of the fog lamps. Both...

Thanks. My installer got them in just fine with any mod. Thanks for the info

Yes it is a 2001 with factory tweeters

Install Alpine Type R components 2001 I was planning on installing these if anyone has suggestions for install the tweeters let me know. If not I will post how I or my installer ended up doing it.

Sometimes with the auto shutoff you have place the nozzle not so deep into tank, it is less likely to shut off before is completley filled. I have ran my runner till near empty(about 50 miles or so once the gas light comes on) and I put up to 17.6gallons in.

solved Problem solved. I just used bic light and heated the white plastic just enough then use the end of a screw driiver handle and pushed it into the plastic. it worked great and the dash is flush with the screen.