Recent content by BoomSticks

Yep, they didn't mention it, because there aren't any special considerations. I didn't have to move anything to get the passenger side bolt out.

Any special considerations for getting the through bolt out of the passenger side?

Not interested in buying. Yes, I'd love an stl for a new fob body.

My google fu is weak today. Does anybody have a link for a 99 key fob body? Especially that squared off one with the screws that I've seen. Thanks!

OMFG this adventure is finally done. We started taking out the position switches and testing them with the meter with the continuity beep. When we went to grab the connector for the front diff position switch, the harness flipped over and we saw a splice that had come apart. The second we...

A small update, my lights are still blinking, but we were able to manually jump the front to unlock it. The work around I've been using to at least get out on some trails is to pull off the vacuum hoses from the VSV, and putting the front hose on the rear VSV nipple. Can't remember which...

Anyone have a link for an electronic wiring diagram for a 99-00? At least for the 4x4 system. It seems like the TC isn't sending the signal to the front to unlock. We can manually jump the front VSVs to lock and unlock the front. We can manually jump the TC actuator to lock and unlock the...

TR-50 Inspection (2000 4Runner) One Touch 2-4 Selector System.pdf - Google Drive

https://www.toyota-4runner.org/3rd-gen-t4rs/267778-another-4wd-broken-thread-3.html#post3234560

What wire was broken and where?

2000 4Runner FSM - Printable - Google Drive

Free fog lights click here!!!!!!!

4wd troubleshooting

Thanks, I'll try those pin continuity combos. And for my reference if I need it: Post #10, Feasibility of a "J"-Shift to Multi-Mode Transfer Case Swap

I replaced mine with a light bar using the fog light wiring.