Recent content by BrunoKnoxville

Thanks for your warning. To the best of my knowledge, Toyota has only released a bulletin for the 5th gens, not the 4th gens. That's probably why shops don't think to check for fan-cooled LED lights on 4ths.

It may be worth grabbing some cheap hologens and popping them in just to test. I know HIDs don't have fans, but who knows. I *did* have LEDs, turns out that was my issue. They were causing codes C0226, C0236, C0246, C0256, C1223 (which is a nothing code), and C1256 - all ABS codes...

ScottD - Can you update us about your fanless LEDs? I've been looking at them, but I'm not sold. How's the heat output? Any issues with the wiring, connectors, or housings?

Thought I'd chime in on this topic... I too had the ABS, VSC, TRAC, and BRAKE lights all come on. They started coming on just shy of 2 years after I installed LED headlights with fans (Opt 7 is the brand). I resigned myself to the fact that my brake booster, skid computer, and accumulator were...

These might help you, too. *The zero point calibration file only applies to 2005/6+. If you have a 2003 or 2004 (maybe 2005) it's a different method. Search for it on YouTube, there's a couple of good videos on it.

I swear I'm not being a smart ass... Do you have LED headlights? Sent from my Pixel 6 using Tapatalk

So, I had a rough time finding info for how to zero point calibrate my 2006 4Runner. The ol' "jump pins 4 and 14 and tap 4 times" method didn't work for me. Thanks to a friend, I finally got it right. To clear the calibration, jump pins 4 and 12 four times, turn the ignition off. Then...

I updated the spreadsheet with some new-ish info. Icon told me that their rear 2" springs have a spring rate of 200lbs (he could have been rounding down from 207); he also told me that the 3" dual-rate springs are 200 over 300 (which may also be rounded). There are now several types/sizes of...

They're great. I had some VLEDs in my old 4Runner, which is now my girlfriends, and the LASFITs (from Amazon) are almost as bright and a fraction of the price.

Howdy folks, Been a lurker here for a while, starting to get a bit more involved. So, I bought my 2006 Limited V8 last November and noticed SEVERE nosedive when "emergency" breaking. I chalked it up to the leaking front shocks and well-used springs. In January I lifted the truck, replacing...

I've got the CBI ditch light brackets, too. Been pleased with them so far, though they're so simple there's not much to rave or complain about. For lights, I went with Black Oak LED floods. I use them as ditch/sideshot lights. They're crazy bright and IP69K rated, so nearly completely water and...

Are you still able to open the hood with out issue or contact with the lights?

Upgraded my reverse lights to some from LASFIT - sooooo much brighter! Will have to get a pic later.

And fwiw, I steered away from OME simply because their front shock and springs are proprietary, meaning you can't use another spring with their shock or different shock with their spring. So if, for example, you're out having fun and blow a shock you'd have to find an OME to replace it, Good...

I've been very, VERY happy with my modest lift (though would like to go a tad taller). My first thought after getting everything installed was "holy shit, this is how it should have felt from the factory!" My Setup: Bilstien 5100 Fronts: $100 (each), Amazon Bilstien 5100 Rears: $81 (each)...