Recent content by bwwwalker

I tried to make the instructions as complete as I could think of. Be sure to have a the pipe and c-clamp needed before or some copper pipe with a pipe cutter so you can cut the pipe you will need to take the pressure off of the c-clip holding in the piston. Once the C-clip assembly is out then a...

To be able to remove the C-clip, the plug on the end needs to be pushed back in a little bit. No matter how hard I pushed, the plug was not moving. I tried to push on the piston and the plug at the same time and it wasn't moving so I tried the piece of pipe 3/4" X 3" in a big C-clamp and this...

I found the exact part and documented the fix In case anyone is looking, I found the exact part needed and documented it in the following link: http://www.toyota-4runner.org/4th-gen-t4rs/248678-2008-4runner-master-cylinder-piston-i-found-part-fixed.html#post2872037 Message me if you have any...

I have a 2008 4Runner and the brake pedal was sinking whenever I would come to a stop. Toyota wants you to change the entire Master Cylinder with a list price on the part being almost $3000!!! Plus the labor on top of that. Toyota does not list the part number for master cylinder piston sub...

When I looked up the Master cylinder piston kit, 0449360350, it is only listed a fitting the older style Master cylinder that was used in 4runners until the mid 2004. Has anyone checked if this piston is the same one for the 2005 to 2009 4Runner master cylinder? I have a 2008 4runner and can't...

I am hearing a whining sound out of I think the front differential. I removed the belly pan cover off and shook the front differentials and took the following two videos. https://youtu.be/XaFpgpAvhIc https://youtu.be/ETpfKdJG2HQ Is this amount of play normal? Looking at the parts list for the...